AutoCAD Tutor SolidModel
-
Upload
hansrajkumawat -
Category
Documents
-
view
215 -
download
0
Transcript of AutoCAD Tutor SolidModel
-
8/10/2019 AutoCAD Tutor SolidModel
1/19
-
8/10/2019 AutoCAD Tutor SolidModel
2/19
2
3D Modeling Basics
Wireframe models
Surface models
Solid models
-
8/10/2019 AutoCAD Tutor SolidModel
3/19
3
Wireframe Model
Represents edge of actualobject
Surfaces of object are notdefined
Transparency and novolume
2D objects in 3D space Use Line, Circle, Arc
-
8/10/2019 AutoCAD Tutor SolidModel
4/19
4
Surface Model
Edges and surfaces are defined
Object has volume but no mass
Each surface is constructed individually
Each surface is created / move to thecorrect orientation w.r.t other surfaces
Easier to visualize than wireframe
Can be displayed in wireframe or hiddenview
Draw / Surfaces
Command: _hide
-
8/10/2019 AutoCAD Tutor SolidModel
5/19
5
Solid Model
A complete computerized replica of the actualobject
Complete surfaces, edges, interior features ofthe object
Object has volumeand mass
Can be displayed in wireframeor hidden view
Constructing primitive shapes
Using Boolean operations to create composite solid
-
8/10/2019 AutoCAD Tutor SolidModel
6/19
6
Constructive Solid Geometry
(CSG) TechniquesPrimitive SolidsDraw / Solids
Box Cone Cylinder Extrude Revolve Sphere Torus Wedge
Boolean OperationsModify / Solid Editing
Union
Joins selected solids
Subtract Subtract one set of solids
from another Intersect
Create a solid ofintersection (commonvolume) from theselected solids
+
-
8/10/2019 AutoCAD Tutor SolidModel
7/19
7
Part Sample(to be used in CAM section)
SW Isometric View
-
8/10/2019 AutoCAD Tutor SolidModel
8/19
8
Part Sample(to be used in CAM section)
Top View
-
8/10/2019 AutoCAD Tutor SolidModel
9/19
9
Common Operations
DrawingEnvironments
Metric unit orientation
Set the drawing limit Set isometric
viewpoint
Primitive Solids and2D Object
Solid boxes
Cylinders
Rectangular
Object Modification
Fillet
Extrude
Subtract
Union
Move
Dimensioning
-
8/10/2019 AutoCAD Tutor SolidModel
10/19
10
Step 0: Setup theenvironment
Set the environment at startup
Metric setting
Viewing in 3D View / 3D Views / SW
Isometric
Select common operations
from Toolbar View / Toolbars
Select Solid Editing, ViewPoint, Object Snap, Modify,
-
8/10/2019 AutoCAD Tutor SolidModel
11/19
11
Step 1: Solid box
Create solid boxat 0,0,0
Define size of thebox: 50,50,15
x, y, z coordinate
-
8/10/2019 AutoCAD Tutor SolidModel
12/19
12
Step 2: Solid from 2D object
Create separate object (2D
rectangularwith the size 44,
44
Round one corner: Fillet
(radius of 22)
Create a solid object using
Extrudefeature
Draw / Solid / Extrude
Height: 5; Taper: 0)
-
8/10/2019 AutoCAD Tutor SolidModel
13/19
13
Step 3: Solid cylinders
Create separate solid objects: 2 Cyl inders:Diameter1 = 20; Diameter2 = 10; Heigh t = 5
Use Subtractcommand to create a hole (Modify / Solid editing)
-
8/10/2019 AutoCAD Tutor SolidModel
14/19
14
Step 4: Move Objects
Moveroundedsquare object tothe base part Use object snap
to help locate thepositions
Subtractsmallbox from thebigger box
-
8/10/2019 AutoCAD Tutor SolidModel
15/19
15
Step 5: Move objects
Movea cylinder
object to an
appropriate
position Move at the base
of the cylinder to22,22,10
Combine(Union)
2 objects
-
8/10/2019 AutoCAD Tutor SolidModel
16/19
16
Step 6: Round Corners
Round the
edges using
Fil let (radius
of 2)
-
8/10/2019 AutoCAD Tutor SolidModel
17/19
17
CAD Assignment
Guidelines and Minimum Requirements
Section 1: Part Design
Each student has to select and design an applicable part that satisfies the followingconditions:
- The part must serve a least one practical purpose.
- The part must be a single solid object
- The overall dimension must not exceed W20cm xL20cm x H20cm
- The part should have at least one curve surface
- The part should have at least one hole (e.g., cylinder hole, rectangular hole, cone)
- At least one corner of the part must be rounded with indicated dimensions.
- The part should have one island
- All dimensions have to be indicated in either isometric view or in several 2
dimensional views.
-
8/10/2019 AutoCAD Tutor SolidModel
18/19
18
CAD Assignment
The part should be able to be machined by at least two of the followingoperations (but not limit to):
Milling, Turning, Wire cutting EDM, Die sinking, Threading, Drilling, Boring,Bending
Cleary indicate the type of material for your designed part.
Clearly indicate your name and last name in the drawing. It can bewritten directly on the designed part or within the drawing area.
-
8/10/2019 AutoCAD Tutor SolidModel
19/19
19
CAD Assignment
Section 2: Written Report Each student has to submit one written report that thoroughly explains the design
steps of the part. Step-by-step instructions accompanied with figures are required.The report must also explain the machining operations of the designed parts.
Ground Rules and Policies Students are required to submit CAD assignment package which include a CAD file
in floppy disk (one diskette for one file) and a written report. Clearly label yourname and student ID on the submitted floppy disk and report.
The CAD assignment packagedues at
4 p.m. on December 28, 05 (Wednesday).
4 p.m. on February 8, 2006 (Wednesday)
No late assignment is accepted.
This assignment must be an individual work. Do not copy your friends. Anyassignment in question will receive a zero score for CAD section. And no rework of
any kind is accepted.