Accommodates a large cable cross section - 25 to 300 sq mm and 400 to 630 sq mm

Also fits sector shaped cables

Facilitates direct voltage testing

Easy to fit

Cost Effective

Re-openable

Re-usable

Can be installed on any termination i.e. Premoulded Heat Shrink etc.

Can be installed on XLPE, PVC or PILC cable

The Terminal Protector is an insulating barrier system, which can be used in

conjunction with any indoor termination.

The Terminal Protector is an unique insulating system for providing Phase to

Phase and Phase to Earth insulation to power cable terminals where these

terminations need to be installed in very compact areas like motor terminal

boxes, ring main units, distribution transformers etc.

The Terminal Protector comprises of an insulating bellow and grommets. All

these components are injection moulded from EPDM rubber, which is highly

insulating and track resistant.

The Terminal Protector is available for insulating right angle connections as well

as in-line connections.

Terminal Protector

Vertical Type

Right Angle Type

3

2

4

6

GrommetBushingBellowBoltPlugConnectorStress Cone

1234567

Terminal Protector

12 kV

28kV

75kV

24 kV

50kV

125kV

36 kV

70 kV

170 kV

Meets following requirements

Test

AC High Voltage withstand Test for

1 min duration

Impulse withstand Test

Rated Voltage

Type tested as per IS-13573 standard.

5

7

1

Important NoticeBefore using this product, you must evaluate it and determine if itis suitable for your intended application. You assume all risks andliability associated with such use.

Warranty; Limited Remedy; Limited Liability.This product will be free from defects in material and manufactureat the time of purchase. 3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.If this product is defective within the warranty period stated above, yourexclusive remedy shall be, at 3M’s option, to replace or repair the 3Mproduct or refund the purchase price of the 3M product. Except whereprohibited by law, 3M will not be liable for any indirect, special,incidental or consequential loss or damage arising from this 3Mproduct, regardless of the legal theory asserted.

Electrical Markets DivisionConcorde Block, UB City,24, Vittal Mallya Road,Bangalore - 560 001.Ph: 080 - 2223 1414Fax: 080 - 22232373

Website :www.3m.com/electricalwww.3m.com/in