32 bitowy procesor RISC 200 MHz IEC 61131-3 Programmable...
3
Wizualizacja PLC Wyświetlacz 5.7", PROFIBUS-DP - seria VT250 (ekonomiczna) VT251-57P-L7-DPM Edition • 2017-06-29T14:38:45+02:00 1 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com Typ VT251-57P-L7-DPM Nr kat. 6828013 Function PLC ze zintegrowanym ekranem dotykowym Display / Touch Display TFT LCD colour display Touch Resistive Active screen area 5.7'' (approx. 118 * 89 mm) Resolution (pixels) 320 × 240 (240 * 320 with edgewise design) Number of usable colours 65536 colours Controller Processor ARM9, 32 bity, 200 MHz Pamięć programu i danych 4 MB (CoDeSys i QViS) Remanent memory 16 kB SDRAM Add-on memory 1 x SD/MMC memory card Real time clock yes System operacyjny rcX Programowanie CODESYS V.3 Interfaces Ethernet Double (integrated switch) Protocols PROFIBUS-DP (Master) Modbus TCP (Master/Slave) Modbus RTU (Master/Slave) Fieldbus PROFIBUS-DP (Master) USB Device Serial RS232 / RS485 Power supply Rated value 24 VDC reverse-polarity protected, 0.35 A maximum Admissible voltage range 20.4…28.8VDC General data Operating ambient conditions 0…50 °C, 10…90 % relative humidity, non-conden- sing Storage ambient conditions -20…60 °C, 10…95 % relative humidity, non-con- densing Certyfikaty CE, cULus Klasa ochrony od przodu IP65 od tyłu IP20 Dimensions Front (W x H x D) 212x156x50mm Cut-out (W x H) 198x142mm Waga approx. 0.7 kg ■ TFT LCD color display ■ 5.7", 320 × 240 pixels, 65 K colors ■ Resistive Touch ■ 2 x RJ45 real-time Ethernet interface ■ Serial interface RS232/485 and USB de- vice ■ PROFIBUS-DP master ■ Programmable with CODESYS V3 acc.to IEC 61131-3 ■ 32 bitowy procesor RISC 200 MHz ■ 4 MB pamięci programu i danych (pliki projektowe CoDeSys i QViS) ■ 16 kB pamięci stałej ■ Karta pamięci SD/MMC ■ Zabezpieczona część przednia, stopień ochrony IP65 ■ Bez etykiety TURCK The HMI touch panel with a 5.7“ TFT display can be used both as operator and control ter- minal. The control software applied is CoDeSys V3 and approved according to the international standard IEC 61131-3. QViS is the software used for visualization and especially developed for embedded sys- tems. The exchange of variables between control unit and visualization is implemented via inter- face. The HMI panel is equipped with all rele- vant RT Ethernet and fieldbus systems.
Transcript of 32 bitowy procesor RISC 200 MHz IEC 61131-3 Programmable...
Wizualizacja PLCWyświetlacz 5.7", PROFIBUS-DP - seria VT250 (ekonomiczna)VT251-57P-L7-DPM
Edi
tion
• 201
7-06
-29T
14:3
8:45
+02:
00
1 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Typ VT251-57P-L7-DPMNr kat. 6828013
Function PLC ze zintegrowanym ekranem dotykowym
Display / TouchDisplay TFT LCD colour displayTouch ResistiveActive screen area 5.7'' (approx. 118 * 89 mm)Resolution (pixels) 320 × 240 (240 * 320 with edgewise design)Number of usable colours 65536 colours
ControllerProcessor ARM9, 32 bity, 200 MHzPamięć programu i danych 4 MB (CoDeSys i QViS)Remanent memory 16 kB SDRAMAdd-on memory 1 x SD/MMC memory cardReal time clock yesSystem operacyjny rcX
Programowanie CODESYS V.3
InterfacesEthernet Double (integrated switch)Protocols PROFIBUS-DP (Master)
Modbus TCP (Master/Slave)Modbus RTU (Master/Slave)
Fieldbus PROFIBUS-DP (Master)USB DeviceSerial RS232 / RS485
Power supplyRated value 24 VDC reverse-polarity protected, 0.35 A maximumAdmissible voltage range 20.4…28.8VDC
General dataOperating ambient conditions 0…50 °C, 10…90 % relative humidity, non-conden-
singStorage ambient conditions -20…60 °C, 10…95 % relative humidity, non-con-
densingCertyfikaty CE, cULusKlasa ochrony od przodu IP65
od tyłu IP20
DimensionsFront (W x H x D) 212x156x50mmCut-out (W x H) 198x142mmWaga approx. 0.7 kg
■ TFT LCD color display
■ 5.7", 320 × 240 pixels, 65 K colors
■ Resistive Touch
■ 2 x RJ45 real-time Ethernet interface
■ Serial interface RS232/485 and USB de-vice
■ PROFIBUS-DP master
■ Programmable with CODESYS V3 acc.toIEC 61131-3
■ 32 bitowy procesor RISC 200 MHz
■ 4 MB pamięci programu i danych (plikiprojektowe CoDeSys i QViS)
■ 16 kB pamięci stałej
■ Karta pamięci SD/MMC
■ Zabezpieczona część przednia, stopieńochrony IP65
■ Bez etykiety TURCK
The HMI touch panel with a 5.7“ TFT displaycan be used both as operator and control ter-minal. The control software applied is CoDeSys V3and approved according to the internationalstandard IEC 61131-3. QViS is the software used for visualizationand especially developed for embedded sys-tems.
The exchange of variables between controlunit and visualization is implemented via inter-face. The HMI panel is equipped with all rele-vant RT Ethernet and fieldbus systems.
Wizualizacja PLCWyświetlacz 5.7", PROFIBUS-DP - seria VT250 (ekonomiczna)VT251-57P-L7-DPM
Edi
tion
• 201
7-06
-29T
14:3
8:45
+02:
00
2 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Connection and pin assignment
Napięcie zasilaniaNominal voltage 24 VDCNominal current 0.35 A
Konfiguracja pinów
Interfejs sieciowy PROFIBUS / MPISUB-D female connector, 9-pole
Konfiguracja pinów
Porty Ethernet2 x RJ45 jackIntegrated switch10/100 Mbps
Konfiguracja pinów
Interfejs RS232SUB-D male connector, 9-poleAttention:Do not connect pins 1, 4, 6 and 9 when using RS232!
Konfiguracja pinów
Wizualizacja PLCWyświetlacz 5.7", PROFIBUS-DP - seria VT250 (ekonomiczna)VT251-57P-L7-DPM
Edi
tion
• 201
7-06
-29T
14:3
8:45
+02:
00
3 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Interfejs USBUSB deviceService interface
Konfiguracja pinów
![[text indescifrabil] din data 10 - Clam Romania...Analiza atentă a factorilor de risc realizată de CLAM – soc. coop. a permis eliminarea majorităţii riscurilor, însă vă recomandăm](https://static.fdocuments.pl/doc/165x107/6073e649289dd624b3089714/text-indescifrabil-din-data-10-clam-romania-analiza-atentf-a-factorilor.jpg)
