OPVISCOMETR Fuel and Lube Oil Multi-Tester · OPVISCOMETR Fuel and Lube Oil Multi-Tester ... use at...
Transcript of OPVISCOMETR Fuel and Lube Oil Multi-Tester · OPVISCOMETR Fuel and Lube Oil Multi-Tester ... use at...
-
Przedsibiorstwo Badawczo-Produkcyjne OPTEL Sp. z o.o. ul. Morelowskiego 30 PL-52-429 WrCaw phone: +48 71 329 68 53 fax.: +48 71 329 68 52 e-mail: [email protected] http://www.optel.pl
OPVISCOMETR
Fuel and Lube Oil Multi-Tester
http://www.optel.eu
The OPVISCOMETR tester is a patented
electronic instrument designed to accurately
measure a variety of fuel and lube oil
characteristics. It provides accurate
laboratory-quality analysis from simple-to-
use test procedures, along with fuel handling
calculations important for proper fuel
management .
The OPVISCOMETR tester is designed in a
portable robust enclosure making it easy to
use at various locations aboard ship, and for
various applications. Thus, it provides
shipboard personnel the ability to monitor
fuel, lube and hydraulic oils at any time.
System components:
1. OPVISCOMETR tester: enclosure includes an electronic with
keypad for operation and data entry and
a digital display for measured and
calculated results,
- Oil sample reservoir located on the top
of the housing to heat the oil sample to
the desired temperature for testing,
- Heater for drying test paper during fuel
compatibility test; 2. Measurement probe/mixer to be
inserted into the oil sample reservoir
during testing;
3. Reaction test body for water-in-oil and
base number tests;
4. Additional accessories:
- Hydrometers for density test,
- Oil sample syringes,
- Beaker, 400 ml.,
- Compatibility test paper,
- Oil sample level gauge,
- Reagent ALCA (BN Test),
- Reagent WT05 (Water Test),
- Aqua Dry Cleaner.
Features:
The following functions can be performed
using OPVISCOMETR tester:
Density Measurement;
Viscosity Measurement (1 to 1000 cSt)
index determination,
injection temperature,
blending ratio,
storage temperature,
units of measure conversion;
Ignition Quality:
CCAI (heavy fuel oil),
CII (distillate fuel oil),
Calorific value;
Fuel Stability/Compatibility
Water content in Oil;
Base Number of Lube Oil.
-
Przedsibiorstwo Badawczo-Produkcyjne OPTEL Sp. z o.o. ul. Morelowskiego 30 PL-52-429 WrCaw phone: +48 71 329 68 53 fax.: +48 71 329 68 52 e-mail: [email protected] http://www.optel.pl
The test results achieved from the OPVISCOMETR tester, although
accurate to laboratory standards, do not replace test results from an
independent certified laboratory. Fuel testing using the COMBOMAR tester
is recommended during bunkering to ensure the correct grade and
satisfactory fuel quality is being delivered, as well as spot checks at any
time.
Functions Features:
CCAI at 50C (HFO ignition quality)
CCAI at 100C (HFO ignition quality)
Calculated Ignition Index (CII) at 50C
(distillate oil ignition quality)
Calorific Value Calculation
Injection Temperature Calculation
Blending Two Oils with Standard Index
-
Przedsibiorstwo Badawczo-Produkcyjne OPTEL Sp. z o.o. ul. Morelowskiego 30 PL-52-429 WrCaw phone: +48 71 329 68 53 fax.: +48 71 329 68 52 e-mail: [email protected] http://www.optel.pl
Viscosity Converting to cSt at 40C
Viscosity Converting to cSt at 50C
Viscosity Converting to cSt at 80C
Viscosity Converting to cSt at 100C
Viscosity Converting to c at 100C
Viscosity Converting to Redwood 1 Seconds
at 100F
Viscosity Converting to Saybolt Universal
Seconds at 100F
Viscosity Converting to Saybolt Furol
Seconds at 122F
stability of a single fuel
and
the compatibility of two fuels blended
together, applicable for residual fuel oils
with viscosities up to 50 cSt at 100C.