1
Product Brief
Description
제품사진
•아래규격에 부합하는 이미지만 가능: 없을 경우
마케팅팀에 의뢰
• 고해상도
• 흰 배경
• 표준크기: 제품이 가득 차게 가로 5cm 규격으로
사각 위치에 맞게 (가로세로 비율 고정)
Key Applications
Features and Benefits
Key Message: - ex) Enabling high flux systems while reduces LED count
- ex) Enabling compact systems with high reliability
- ex) High reliability and High quality of light
- ex) Flicker-free AC/DC LED Solution
- ex) High-efficient Dimming Solution
Product Family: - ex) Mid-Power LED
- ex) High-Power LED for Automotive
- ex) Chip on Board
Product ID (part number): - ex) STW8C2SA
- ex) SZ5-M0-WN-C8
Description
•
Features and Benefits
•
Key Applications
•
•표는 반드시
“Table 번호#. 표 설명” 을 제목으로 한다.
Rev6.0, July 28, 2017 www.seoulviosys.com
표 모양 동일 (하기 예시)
-표 머리글 부분 : 초록색바탕, 흰색글씨, 흰색 줄
-표 내용 부분 : 흰색바탕, 검은색 글씨, 투명 줄
-글씨체/크기 : Arial 8
-Unit 열은 표 우측으로 지정
Part Number CCT CRI
Color Min. Typ. Max. Min
Certificate 아이콘 삽입
(해당되는 아이콘 오른쪽 에서 왼쪽방향으로 순차 삽입)
Application 아이콘 삽입
(해당되는 아이콘 오른쪽 에서 왼쪽/아랫줄부터 순차 삽입)
TV, PC, NB,
MNT, Mobile
Automotive
Lighting, MR16, PAR,
down light
Bulb, LFT
Outdoor, streetlight,
tunnel, parking
Home appliance
Architectural,
Entertainment
Sign, Channel
Sensor, Torch
Application 응용제품 아이콘 삽입
글씨체는 : Arial, 10pt
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED AAP - CUD8AF1D
Deep UV LED - 275nm
CUD8AF1D
UV AAP series (CUD8AF1D)
CUD8AF1D is a deep ultraviolet light
emitting diode with peak emission
wavelengths from 270nm to 280nm.
The LED is sealed in full aluminum
packages with a choice of UV-transparent
optical window.
It incorporates state of the art SMD design
and low thermal resistance.
CUD8AF1D is designed for air and water
sterilization and tools including chemical and
biological analysis in that spectral range.
• Deep ultraviolet LED
• Low thermal resistance
• SMT solderable
• Lead Free product
• RoHS compliant
• Disinfection
• Fluorescent spectroscopy
• Chemical and Biological analysis
RoHS LM-80 MacAdam
3-Step
RoHS
2 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Table of Contents 는 Product Brief 다음 장에 위치
레이아웃 순서에 맞게 추가
레이아웃 추가 시 데이터 시트 목차를 추가해주세요.
레이아웃 추가 방법
Packaging – PKG / Module 레이아웃 선택 가능
Revision History 추가하지 마십시오.
Table of Contents
Index
• Product Brief
• Table of Contents
• Performance Characteristics
• Characteristics Graph
• Binning Structure
• Mechanical Dimensions
• Recommended Solder Pad
• Reflow Soldering Characteristics
• Emitter Tape & Reel Packaging
• Product Nomenclature (Labeling Information)
• Reliability
• Handling of Silicone Resin for LEDs
• Precaution for Use
• Company Information
3 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Performance Characteristics
전기적 특성 및 광 특성 스펙 테이블
하기 예시와 같이 테이블에 맞는 조건을 기입 Table #. Electro Optical Characteristics, IF = 350mA, Tj=25
- 전기적 특성 – 아래첨자/대문자 예) IF VF ФV
- 온도적 특성 – 아래첨자/소문자 예) Ta/j Topr0 Tstg
Performance Characteristics (Table) 하기와 같은 표 사용시 해당 슬라이드 사용하시면 됩니다.
기입되어 있는 내용 참고하시고 내용 추가/수정 가능
- ex) Electro Optical Characteristics
- ex) Absolute Maximum Ratings
* Power Dissipation
: max current x max VF(@max current)
* VF 공차 : ±0.1V (STD 사양)
* 밝기 공차 : ±10% (STD 사양)
* 수명 조건 : 고객 협의 조건 기재
Table 1. Electro - Optical characteristic at 200mA
Table 2. Absolute Maximum Rating
Parameter Symbol Value
Unit Min. Typ. Max.
Forward Current IF - - 250 mA
Power Dissipation PD - - 1.8 W
Operating Temperature Topr - 30 - 60 ºC
Storage Temperature Tstg - 40 - 100 ºC
Thermal resistance (J to S) [5] RθJ-S - 24.2 - ºC/W
Parameter Symbol Value Unit
Peak wavelength [1] λp 275 nm
Radiant Flux [2] Φe [3] 19 mW
Forward Voltage [4] VF 6.0 V
Spectrum Half Width Δ λ 10 nm
View Angle 2Θ1/2 120 deg.
Notes :
1. Peak Wavelength Measurement tolerance : ±3nm
2. Radiant Flux Measurement tolerance : ± 10%
3. Φe is the Total Radiant Flux as measured with an integrated sphere.
4. Forward Voltage Measurement tolerance : ±3%
5. RθJ-S is the thermal resistance between chip junction to solder.
(Ta=25, RH=30%)
4 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Characteristics Graph
차트 사각형에 차트의 X축/ Y축을 맞춘다.
* Intensity vs Forward Current
-. Linear graph
-. X축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Y축 : Relative Luminous Intensity [%]
정격전류에서 100이 되도록
-. Ta = 25
* Forward Current vs. Forward Voltage
-. Linear graph
-. X축 : Forward Voltage[V]
-. Y축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Ta = 25
•차트는 반드시
“Fig 번호#. 차트 설명” 을 제목으로 한다.
Performance Characteristics (Chart) 하기와 같은 차트 사용시 해당 슬라이드 사용하시면 됩니다.
- ex) Color Spectrum
- ex) Radiant pattern
- ex) Forward Voltage vs. Forward Current
- ex) Forward Current vs. Relative Luminous Flux
- ex) Forward Current vs. CIE X, Y Shift
- ex) Relative Light Output vs. Junction Temperature.
- ex) Junction Temp. vs. CIE X, Y Shift
- ex) Relative Forward vs. Junction Temperature
- ex) Maximum Forward Current vs. Ambient Temperature
- ex) Allowable Forward Current vs. Duty Ratio
- ex) Allowable Forward Current vs. Ambient Temperature
하기 예시와 같이 테이블에 맞는 조건을 기입 Fig #. Color Spectrum, IF = 350mA, Tj=25
- 전기적 특성 – 아래첨자/대문자 예) IF VF ФV
- 온도적 특성 – 아래첨자/소문자 예) Ta/j Topr0 Tstg
* Radiation
-. Linear graph
-. X축은 실선, Y축은 점선
-. X축 : Radiation angle [deg.]
-. Y축 : Relative Intensity [a.u.]
-. Ta = 25
* Spectrum
-. Linear graph
-. X축 : Wavelength [nm]
350~800nm 표시
-. Y축 : Normalized Intensity [a.u.]
-. Ta = 25
IF = 정격전류 기재
* Allowable Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : Allowable Forward Current [mA]
온도는 0~85까지
-. Rth, Tjmax 기준으로 산출한다. Graph slope에 Rth를 기재한다.
* Allowable Forward Current vs. Duty Ratio
-. Log graph
-. X축 : Duty ratio [%]
-. Y축 : Allowable Forward Current [mA]
-. Duty 10% : peak max current
Duty 100% : DC max current
* Color coordinate vs. Ambient Temperature
-. Linear graph (점+선)
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
온도는 -30, 0, 25, 50, 85 표시
-. IF = 정격전류 기재
* Color Coordinate vs. Forward Current
-. Linear graph (점+선)
-. 전류는 peak forward current까지 측정
-. 측정조건(최소 6조건)
:1mA, ¼ 정격전류, ½ 정격전류, 정격전류, max DC전류,
peak 전류
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
-. Ta = 25
* Relative Luminosity vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : IV / IV @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
* Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : VF / VF @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
Fig 1. Spectrum, Ta=25, IF=200mA
Fig 2. Forward Voltage vs. Forward Current, Ta=25
0.00
0.20
0.40
0.60
0.80
1.00
1.20
250 260 270 280 290 300 310
No
rmalized
In
ten
sit
y
Wavelength [nm]
0.00
0.05
0.10
0.15
0.20
0.25
0 1 2 3 4 5 6 7
Fo
rward
Cu
rren
t [A
]
Forward Voltage [V]
5 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Characteristics Graph
차트 사각형에 차트의 X축/ Y축을 맞춘다.
* Intensity vs Forward Current
-. Linear graph
-. X축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Y축 : Relative Luminous Intensity [%]
정격전류에서 100이 되도록
-. Ta = 25
* Forward Current vs. Forward Voltage
-. Linear graph
-. X축 : Forward Voltage[V]
-. Y축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Ta = 25
•차트는 반드시
“Fig 번호#. 차트 설명” 을 제목으로 한다.
Performance Characteristics (Chart) 하기와 같은 차트 사용시 해당 슬라이드 사용하시면 됩니다.
- ex) Color Spectrum
- ex) Radiant pattern
- ex) Forward Voltage vs. Forward Current
- ex) Forward Current vs. Relative Luminous Flux
- ex) Forward Current vs. CIE X, Y Shift
- ex) Relative Light Output vs. Junction Temperature.
- ex) Junction Temp. vs. CIE X, Y Shift
- ex) Relative Forward vs. Junction Temperature
- ex) Maximum Forward Current vs. Ambient Temperature
- ex) Allowable Forward Current vs. Duty Ratio
- ex) Allowable Forward Current vs. Ambient Temperature
하기 예시와 같이 테이블에 맞는 조건을 기입 Fig #. Color Spectrum, IF = 350mA, Tj=25
- 전기적 특성 – 아래첨자/대문자 예) IF VF ФV
- 온도적 특성 – 아래첨자/소문자 예) Ta/j Topr0 Tstg
* Radiation
-. Linear graph
-. X축은 실선, Y축은 점선
-. X축 : Radiation angle [deg.]
-. Y축 : Relative Intensity [a.u.]
-. Ta = 25
* Spectrum
-. Linear graph
-. X축 : Wavelength [nm]
350~800nm 표시
-. Y축 : Normalized Intensity [a.u.]
-. Ta = 25
IF = 정격전류 기재
* Allowable Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : Allowable Forward Current [mA]
온도는 0~85까지
-. Rth, Tjmax 기준으로 산출한다. Graph slope에 Rth를 기재한다.
* Allowable Forward Current vs. Duty Ratio
-. Log graph
-. X축 : Duty ratio [%]
-. Y축 : Allowable Forward Current [mA]
-. Duty 10% : peak max current
Duty 100% : DC max current
* Color coordinate vs. Ambient Temperature
-. Linear graph (점+선)
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
온도는 -30, 0, 25, 50, 85 표시
-. IF = 정격전류 기재
* Color Coordinate vs. Forward Current
-. Linear graph (점+선)
-. 전류는 peak forward current까지 측정
-. 측정조건(최소 6조건)
:1mA, ¼ 정격전류, ½ 정격전류, 정격전류, max DC전류,
peak 전류
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
-. Ta = 25
* Relative Luminosity vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : IV / IV @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
* Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : VF / VF @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
Fig 3. Forward Current vs. Relative Radiant Flux, Ta=25
Fig 4. Forward Current vs. Peak Wavelength, Ta=25
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
180 190 200 210 220 230 240 250
Rela
tiv
e R
ad
ian
tFlu
x
Forward Current [mA]
260
265
270
275
280
285
290
180 190 200 210 220 230 240 250
Peak W
av
ele
ng
th [
nm
]
Forward Current [mA]
6 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Characteristics Graph
차트 사각형에 차트의 X축/ Y축을 맞춘다.
* Intensity vs Forward Current
-. Linear graph
-. X축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Y축 : Relative Luminous Intensity [%]
정격전류에서 100이 되도록
-. Ta = 25
* Forward Current vs. Forward Voltage
-. Linear graph
-. X축 : Forward Voltage[V]
-. Y축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Ta = 25
•차트는 반드시
“Fig 번호#. 차트 설명” 을 제목으로 한다.
Performance Characteristics (Chart) 하기와 같은 차트 사용시 해당 슬라이드 사용하시면 됩니다.
- ex) Color Spectrum
- ex) Radiant pattern
- ex) Forward Voltage vs. Forward Current
- ex) Forward Current vs. Relative Luminous Flux
- ex) Forward Current vs. CIE X, Y Shift
- ex) Relative Light Output vs. Junction Temperature.
- ex) Junction Temp. vs. CIE X, Y Shift
- ex) Relative Forward vs. Junction Temperature
- ex) Maximum Forward Current vs. Ambient Temperature
- ex) Allowable Forward Current vs. Duty Ratio
- ex) Allowable Forward Current vs. Ambient Temperature
하기 예시와 같이 테이블에 맞는 조건을 기입 Fig #. Color Spectrum, IF = 350mA, Tj=25
- 전기적 특성 – 아래첨자/대문자 예) IF VF ФV
- 온도적 특성 – 아래첨자/소문자 예) Ta/j Topr0 Tstg
* Radiation
-. Linear graph
-. X축은 실선, Y축은 점선
-. X축 : Radiation angle [deg.]
-. Y축 : Relative Intensity [a.u.]
-. Ta = 25
* Spectrum
-. Linear graph
-. X축 : Wavelength [nm]
350~800nm 표시
-. Y축 : Normalized Intensity [a.u.]
-. Ta = 25
IF = 정격전류 기재
* Allowable Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : Allowable Forward Current [mA]
온도는 0~85까지
-. Rth, Tjmax 기준으로 산출한다. Graph slope에 Rth를 기재한다.
* Allowable Forward Current vs. Duty Ratio
-. Log graph
-. X축 : Duty ratio [%]
-. Y축 : Allowable Forward Current [mA]
-. Duty 10% : peak max current
Duty 100% : DC max current
* Color coordinate vs. Ambient Temperature
-. Linear graph (점+선)
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
온도는 -30, 0, 25, 50, 85 표시
-. IF = 정격전류 기재
* Color Coordinate vs. Forward Current
-. Linear graph (점+선)
-. 전류는 peak forward current까지 측정
-. 측정조건(최소 6조건)
:1mA, ¼ 정격전류, ½ 정격전류, 정격전류, max DC전류,
peak 전류
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
-. Ta = 25
* Relative Luminosity vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : IV / IV @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
* Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : VF / VF @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
Fig 5. Ambient Temperature vs. Relative Radiant Flux, IF=200mA
Fig 6. Ambient Temperature vs. Peak Wavelength, IF=200mA
0%
20%
40%
60%
80%
100%
120%
25 30 35 40 45 50 55 60
Rela
tiv
e R
ad
ian
tFlu
x
Ambient Temperature []
260
265
270
275
280
285
290
25 30 35 40 45 50 55 60
Peak W
av
ele
ng
th [
nm
]
Ambient Temperature []
7 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Characteristics Graph
차트 사각형에 차트의 X축/ Y축을 맞춘다.
* Intensity vs Forward Current
-. Linear graph
-. X축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Y축 : Relative Luminous Intensity [%]
정격전류에서 100이 되도록
-. Ta = 25
* Forward Current vs. Forward Voltage
-. Linear graph
-. X축 : Forward Voltage[V]
-. Y축 : Forward current[mA]
전류는 peak forward current 까지 측정할것
-. Ta = 25
•차트는 반드시
“Fig 번호#. 차트 설명” 을 제목으로 한다.
Performance Characteristics (Chart) 하기와 같은 차트 사용시 해당 슬라이드 사용하시면 됩니다.
- ex) Color Spectrum
- ex) Radiant pattern
- ex) Forward Voltage vs. Forward Current
- ex) Forward Current vs. Relative Luminous Flux
- ex) Forward Current vs. CIE X, Y Shift
- ex) Relative Light Output vs. Junction Temperature.
- ex) Junction Temp. vs. CIE X, Y Shift
- ex) Relative Forward vs. Junction Temperature
- ex) Maximum Forward Current vs. Ambient Temperature
- ex) Allowable Forward Current vs. Duty Ratio
- ex) Allowable Forward Current vs. Ambient Temperature
하기 예시와 같이 테이블에 맞는 조건을 기입 Fig #. Color Spectrum, IF = 350mA, Tj=25
- 전기적 특성 – 아래첨자/대문자 예) IF VF ФV
- 온도적 특성 – 아래첨자/소문자 예) Ta/j Topr0 Tstg
* Radiation
-. Linear graph
-. X축은 실선, Y축은 점선
-. X축 : Radiation angle [deg.]
-. Y축 : Relative Intensity [a.u.]
-. Ta = 25
* Spectrum
-. Linear graph
-. X축 : Wavelength [nm]
350~800nm 표시
-. Y축 : Normalized Intensity [a.u.]
-. Ta = 25
IF = 정격전류 기재
* Allowable Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : Allowable Forward Current [mA]
온도는 0~85까지
-. Rth, Tjmax 기준으로 산출한다. Graph slope에 Rth를 기재한다.
* Allowable Forward Current vs. Duty Ratio
-. Log graph
-. X축 : Duty ratio [%]
-. Y축 : Allowable Forward Current [mA]
-. Duty 10% : peak max current
Duty 100% : DC max current
* Color coordinate vs. Ambient Temperature
-. Linear graph (점+선)
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
온도는 -30, 0, 25, 50, 85 표시
-. IF = 정격전류 기재
* Color Coordinate vs. Forward Current
-. Linear graph (점+선)
-. 전류는 peak forward current까지 측정
-. 측정조건(최소 6조건)
:1mA, ¼ 정격전류, ½ 정격전류, 정격전류, max DC전류,
peak 전류
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
-. Ta = 25
* Relative Luminosity vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : IV / IV @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
* Forward Current vs. Ambient Temperature
-. Linear graph
-. X축 : Ambient Temperature []
-. Y축 : VF / VF @25 [a.u.]
온도는 operating temp. 영역 (-30~85)
-. IF = 정격전류 기재
Fig 7. Ambient Temperature vs. Forward Voltage, IF=200mA
Fig 8. Typical Spatial Distribution, IF=200mA
0.0
0.2
0.4
0.6
0.8
1.0
1.2
-90 -60 -30 0 30 60 90
No
rmalized
In
ten
sit
y
Viewing Angle [˚]
5.4
5.6
5.8
6.0
6.2
6.4
6.6
25 30 35 40 45 50 55 60
Fo
rward
Vo
ltag
e [
V]
Ambient Temperature []
8 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Binning Structure
CIE Chromaticity Diagram
그림 밑에 Description Table 필요 시 추가
-. X축 : Color coordinate x
-. Y축 : Color coordinate y
-. 좌표는 소문자임 (x, y)
-. 소수점은 통일할 것. (3자리 추천)
Y1Y2 Y3Y4Y5 Y6
Wp [nm] Radiant Flux [mW] Vf [V]
BIN MIN MAX BIN MIN MAX BIN MIN MAX
c2 270 275 B12 12 14 a 5.0 5.2
c3 275 280 B14 14 16 b 5.2 5.4
B16 16 18 c 5.4 5.6
B18 18 20 d 5.6 5.8
B20 20 22 e 5.8 6.0
f 6.0 6.2
g 6.2 6.4
h 6.4 6.6
i 6.6 6.8
j 6.8 7.0
Table 3. Binning Structure , IF=200mA
Table 4. Ranks :
Notes :
1. Peak Wavelength Measurement tolerance : ±3nm
2. Radiant Flux Measurement tolerance : ± 10%
3. Forward Voltage Measurement tolerance : ±3%
Main Ranks
Binning Code Description Unit
Y1Y2 Peak Wavelength nm
Y3Y4Y5 Radiant Flux mW
Y6 Forward Voltage V
9 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Mechanical Dimensions
Molding depth 기재 시 소제목 달고 넣기
(* Molding depth)
(1) All dimensions are in millimeters.
(2) Scale : none
(3) Undefined tolerance is ±0.2mm
6.3
51.4
6.35 0.6
3.73 1.38 1.23
Cathode
< Package Outline>
Top view Bottom view
Side view
Electrical
Isolation
Cathode Mark
Anode
Circuit
: Cathode
: Anode
1.8
10 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Recommended Solder Pad
Recommended PCB solder pad (Unit :)
: Cathode
: Anode
Notes :
[1] Scale : none
[2] This drawing without tolerances are for reference only
11 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Reflow Soldering Characteristics
* Hand soldering conditions
-. 350 이하 / 3초 이내
기입되어 있는 내용 참고하시고
내용 추가/수정 가능
Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly
Average ramp-up rate (Tsmax to Tp) 3° C/second max. 3° C/second max.
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (Tsmin to Tsmax) (ts)
100 °C
150 °C
60-120 seconds
150 °C
200 °C
60-180 seconds
Time maintained above:
- Temperature (TL)
- Time (tL)
183 °C
60-150 seconds
217 °C
60-150 seconds
Peak Temperature (Tp) 215 260
Time within 5°C of actual Peak
Temperature (tp)2 10-30 seconds 20-40 seconds
Ramp-down Rate 6 °C/second max. 6 °C/second max.
Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.
* Caution 1. Reflow soldering should not be done more than one time.
2. Repairs should not be done after the LEDs have been soldered.
When repair is unavoidable, suitable tools must be used.
3. Die slug is to be soldered.
4. When soldering, do not put stress on the LEDs during heating.
5. After soldering, do not warp the circuit board.
6. Recommend to use a convection type reflow machine with 7 ~ 8 zones.
12 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Emitter Tape & Reel Packaging
<PKG용>
Module용은 다른 레이아웃 선택하시기 바랍니다.
제품 이미지 변경 불가
Notes:
1.Quantity : 100pcs/Reel
2.Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm
3.Adhesion Strength of Cover Tape : Adhesion strength to be 10-60g when the cover tape
is turned off from the carrier tape at the angle of 10º to the carrier tape
CATHODE MARK
13 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Emitter Tape & Reel Packaging
<PKG용>
Module용은 다른 레이아웃 선택하시기 바랍니다.
제품 이미지 변경 불가
14 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Product Nomenclature
제품 명명법 (nomenclature)
-Part Numbering System
-Lot Numbering System 중
필요한 표 선택하여 사용하시면 됩니다.
* 라벨사양 확인할 것
기입되어 있는 내용 참고하시고
내용 추가/수정 가능
Table 6. Lot Numbering System: Y1Y1Y2Y3Y3Y4Y5Y5Y5Y5Y5 - Y6Y6Y6 - Y7Y7Y7 - Y8Y8Y8Y8Y8Y8
Lot Number Code Description
Y1 Year
Y2 Month
Y3 Day
Y4 Production area
Y5 Mass order
Y6 Taping number
Y7 Reel number
Y8 Internal management number
Part Number Code Description Part Number Value
X1 Company C SVC
X2 UV LED U
X3X4 Wavelength D8 Deep UV 275nm
X5 Package Series A AAP
X6 Lens type F Flat window
X7 Chip Q’ty 1 1 chip
X8 Version
A Ver0
B Ver1
C Ver2
D Ver3
Y1Y2Y3Y4Y5Y6
Table 5. Part Numbering System: X1X2X3X4X5X6X7X8
Y1Y1Y2Y3Y3Y4Y5Y5Y5Y5Y5 - Y6Y6Y6 - Y7Y7Y7 - Y8Y8Y8Y8Y8Y8
Y1
15 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Reliability Test
* 판정항목 및 기준
-. Reverse Current : without Zener type만 기재
-. SSC STD : VF x1.2 이하 / IR x2.0이하
/ IV x0.7이상
* 기본 신뢰성 10종 확인
Table 7. Test Result
Parameter Symbol Test Conditions Max. or Min.
allowable shift value
Forward Voltage VF IF=200mA Max. Initial measurement x 1.2
Radiant Flux Φe IF=200mA Min. Initial measurement x 0.7
Table 8. Failure Criteria
Notes :
1. The value is measured after the test sample is cooled down to the room temperature.
Test Item Test Condition Note # Failed
/Tested
Room Temp.
Operational Life Ta=25, IF=200mA 1000hrs 0/5
Thermal shock
Ta max=120, Ta min=-40
30min dwell/transfer time : 10sec,
1 cycle=1hr
200 cycles 0/22
Resistance to Soldering Temp=260±5, Time : 10±1 sec 1 time 0/10
ESD R=1.5kΩ, C=100pF
Voltage level=2kV
3 times
Negative
/positive
0/22
16 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Handling of Silicone Resin for LEDs
<PKG용>
- 제품에 해당하는 내용 추가 및 수정하십시오.
- 해당 사진 확인 필요
(1) During processing, mechanical stress on the surface should be minimized as much as possible.
Sharp objects of all types should not be used to pierce the sealing compound.
(2) In general, LEDs should only be handled from the side. By the way, this also applies to
LEDs without a silicone sealant, since the surface can also become scratched.
(3) When populating boards in SMT production, there are basically no restrictions regarding the form
of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be
prevented. This is assured by choosing a pick and place nozzle which is larger than the LED’s
reflector area.
(4) Silicone differs from materials conventionally used for the manufacturing of LEDs. These
conditions must be considered during the handling of such devices. Compared to standard
encapsulants, silicone is generally softer, and the surface is more likely to attract dust. As
mentioned previously, the increased sensitivity to dust requires special care during processing. In
cases where a minimal level of dirt and dust particles cannot be guaranteed, a suitable cleaning
solution must be applied to the surface after the soldering of components.
(5) SVC suggests using isopropyl alcohol for cleaning. In case other solvents are used, it must be
assured that these solvents do not dissolve the package or resin. Ultrasonic cleaning is not
recommended. Ultrasonic cleaning may cause damage to the LED.
(6) Please do not mold this product into another resin (epoxy, urethane, etc) and do not handle this
product with acid or sulfur material in sealed space.
(7) Avoid leaving fingerprints on silicone resin parts.
17 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Precaution for Use
SSC표준화결론(개선후)
TOP & SI
DE
TOP & SI
DE
MSL (Moisture Sensitive Level) LEVEL 3 LEVEL 2a
1. Shelf life in Sealing b
ag 저장기한
(실링백 상태로)
Months
개월 12 개월 12 개월
Temperature
(maximum)
온도 (이하)
30 30
Humidity
(maximum)
습도 (미만)
50%RH 50%RH
2. Peak package body temperature
(제품 최대 온도) 240 240
3. After this bag is
opened
실링백 개봉 후 조건
hours
시간 (이내)
168 hours
(7days)
672 hours
(28days)
Temperature
(maximum)
온도 (이하)
30 30
Humidity
(less than)
습도 (미만)-규격
Limit성격
60%RH 60%RH
Stored
저장조건(미만) 10%RH 10%RH
4. Devices require bake
,
before mounting, if:
사용 전 Baking 검사
a. Humiduty
Indicator Card 30%RH 30%RH
Temperature
온도 조건에서 23±5 23±5
b. is not met.
MSL Level (미만)
3 3
5. If baking is required,
건조(baking) 조건
hours
시간 (이내)
10~24
hours
10~24
hours
Temperature
온도 조건 65±5 65±5
Humidity
(less than)
습도조건 (미만)
10%RH 10%RH
(1) Storage
To avoid the moisture penetration, we recommend storing LEDs in a dry box with a desiccant . The
recommended storage temperature range is 5 to 30 and a maximum humidity of RH50%.
(2) Use Precaution after Opening the Packaging
Use proper SMD techniques when the LED is to be soldered dipped as separation of the lens may
affect the light output efficiency.
Pay attention to the following:
a. Recommend conditions after opening the package
- Sealing / Temperature : 5 ~ 30 Humidity : less than RH60%
b. If the package has been opened more than 4 weeks (MSL 2a) or the color of
the desiccant changes, components should be dried for 10-24hr at 65±5
(3) Do not apply mechanical force or excess vibration during the cooling process to normal
temperature after soldering.
(4) Do not rapidly cool device after soldering.
(5) Components should not be mounted on warped (non coplanar) portion of PCB.
(6) Radioactive exposure is not considered for the products listed here in.
(7) This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA (Isopropyl Alcohol) should be used.
(8) When the LEDs are in operation the maximum current should be decided after measuring the
package temperature.
(9) LEDs must be stored in a clean environment. We recommend LEDs store in nitrogen-filled
container.
(10) The appearance and specifications of the product may be modified for improvement without
notice.
<PKG_MSL 2a용>
- 제품에 해당하는 내용 추가 및 수정하십시오.
(12) Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. 삭제
18 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Precaution for Use
SSC표준화결론(개선후)
TOP & SI
DE
TOP & SI
DE
MSL (Moisture Sensitive Level) LEVEL 3 LEVEL 2a
1. Shelf life in Sealing b
ag 저장기한
(실링백 상태로)
Months
개월 12 개월 12 개월
Temperature
(maximum)
온도 (이하)
30 30
Humidity
(maximum)
습도 (미만)
50%RH 50%RH
2. Peak package body temperature
(제품 최대 온도) 240 240
3. After this bag is
opened
실링백 개봉 후 조건
hours
시간 (이내)
168 hours
(7days)
672 hours
(28days)
Temperature
(maximum)
온도 (이하)
30 30
Humidity
(less than)
습도 (미만)-규격
Limit성격
60%RH 60%RH
Stored
저장조건(미만) 10%RH 10%RH
4. Devices require bake
,
before mounting, if:
사용 전 Baking 검사
a. Humiduty
Indicator Card 30%RH 30%RH
Temperature
온도 조건에서 23±5 23±5
b. is not met.
MSL Level (미만)
3 3
5. If baking is required,
건조(baking) 조건
hours
시간 (이내)
10~24
hours
10~24
hours
Temperature
온도 조건 65±5 65±5
Humidity
(less than)
습도조건 (미만)
10%RH 10%RH
(11) VOCs (Volatile organic compounds) emitted from materials used in the construction of fixtures ca
n penetrate silicone encapsulants of LEDs and discolor when exposed to heat and photonic energy. T
he result can be a significant loss of light output from the fixture. Knowledge of the properties of the m
aterials selected to be used in the construction of fixtures can help prevent these issues.
(12) The slug is electrically isolated.
(13) Attaching LEDs, do not use adhesives that outgas organic vapor.
(14) The driving circuit must be designed to allow forward voltage only when it is ON or OFF. If the rev
erse voltage is applied to LED, migration can be generated resulting in LED damage.
(15) LEDs are sensitive to Electro-Static Discharge (ESD) and Electrical Over Stress (EOS). Below is
a list of suggestions that Seoul Viosys purposes to minimize these effects.
a. ESD (Electro Static Discharge)
Electrostatic discharge (ESD) is the defined as the release of static electricity when two objects come
into contact. While most ESD events are considered harmless, it can be an expensive problem in
many industrial environments during production and storage. The damage from ESD to an LEDs may
cause the product to demonstrate unusual characteristics such as:
- Increase in reverse leakage current lowered turn-on voltage
- Abnormal emissions from the LED at low current
The following recommendations are suggested to help minimize the potential for an ESD event.
One or more recommended work area suggestions:
- Ionizing fan setup
- ESD table/shelf mat made of conductive materials
- ESD safe storage containers
One or more personnel suggestion options:
- Antistatic wrist-strap
- Antistatic material shoes
- Antistatic clothes
Environmental controls:
- Humidity control (ESD gets worse in a dry environment)
<PKG용>
- 제품에 해당하는 내용 추가 및 수정하십시오.
19 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Precaution for Use
SSC표준화결론(개선후)
TOP & SI
DE
TOP & SI
DE
MSL (Moisture Sensitive Level) LEVEL 3 LEVEL 2a
1. Shelf life in Sealing b
ag 저장기한
(실링백 상태로)
Months
개월 12 개월 12 개월
Temperature
(maximum)
온도 (이하)
30 30
Humidity
(maximum)
습도 (미만)
50%RH 50%RH
2. Peak package body temperature
(제품 최대 온도) 240 240
3. After this bag is
opened
실링백 개봉 후 조건
hours
시간 (이내)
168 hours
(7days)
672 hours
(28days)
Temperature
(maximum)
온도 (이하)
30 30
Humidity
(less than)
습도 (미만)-규격
Limit성격
60%RH 60%RH
Stored
저장조건(미만) 10%RH 10%RH
4. Devices require bake
,
before mounting, if:
사용 전 Baking 검사
a. Humiduty
Indicator Card 30%RH 30%RH
Temperature
온도 조건에서 23±5 23±5
b. is not met.
MSL Level (미만)
3 3
5. If baking is required,
건조(baking) 조건
hours
시간 (이내)
10~24
hours
10~24
hours
Temperature
온도 조건 65±5 65±5
Humidity
(less than)
습도조건 (미만)
10%RH 10%RH
b. EOS (Electrical Over Stress)
Electrical Over-Stress (EOS) is defined as damage that may occur when an electronic device is
subjected to a current or voltage that is beyond the maximum specification limits of the device.
The effects from an EOS event can be noticed through product performance like:
- Changes to the performance of the LED package
(If the damage is around the bond pad area and since the package is completely encapsulated
the package may turn on but flicker show severe performance degradation.)
- Changes to the light output of the luminaire from component failure
- Components on the board not operating at determined drive power
Failure of performance from entire fixture due to changes in circuit voltage and current across total
circuit causing trickle down failures. It is impossible to predict the failure mode of every LED exposed
to electrical overstress as the failure modes have been investigated to vary, but there are some
common signs that will indicate an EOS event has occurred:
- Damaged may be noticed to the bond wires (appearing similar to a blown fuse)
- Damage to the bond pads located on the emission surface of the LED package
(shadowing can be noticed around the bond pads while viewing through a microscope)
- Anomalies noticed in the encapsulation and phosphor around the bond wires.
- This damage usually appears due to the thermal stress produced during the EOS event.
c. To help minimize the damage from an EOS event Seoul Viosys recommends utilizing:
- A surge protection circuit
- An appropriately rated over voltage protection device
- A current limiting device
<PKG용>
- 제품에 해당하는 내용 추가 및 수정하십시오.
20 Rev6.0, July 28, 2017 www.seoulviosys.com
AAP - CUD8AF1D
“제품 명 – 제품 군” 을 기입하십시오.
제품 군은 홈페이지 응용분야 분류기준을 참고한다.
(예) SZ5M0WWC9 – High-power LED
글씨체는 : Arial, 10pt
Revision numbering 기준:
• 가스펙은 0.0 부터 시작 0.x….
• Final 승인원: 1.0 부터 시작
• 기존에서 일부 수정: +0.1
• 새로운 Data 추가 /또는 기존 것 삭제: +1.0
수정일자 표기형식; YYYY-MM-DD
(예) 2013-04-01
Company Information
Published by
Seoul Viosys © 2013 All Rights Reserved.
Company Information
Seoul Viosys (www.seoulviosys.com) manufactures light emitting diodes (LEDs) with a full range of
UV wavelengths from UVC to UVA (under 400nm) for Industrial Curing, Air/Water Purification,
Disinfection and Home appliance.
The company is one of the world leading UV LED supplier, holding more than 4,000 patents globally,
while offering various kinds of LED technologies and application-solutions in High power UV LED, UV
sensor, UV LED Lamp and variety of UV LED sourced Applications.
The company's broad product portfolio includes hybrid modules for unique applications such as UV
disinfection, deodorization, UV purification as well as customized modules for your Application.
Legal Disclaimer
Information in this document is provided in connection with Seoul Viosys products. With respect to
any examples or hints given herein, any typical values stated herein and/or any information regarding
the application of the device, Seoul Viosys hereby disclaims any and all warranties and liabilities of
any kind, including without limitation, warranties of non-infringement of intellectual property rights of
any third party. The appearance and specifications of the product can be changed to improve the
quality and/or performance without notice.
※ 주의사항
1) Revision은 내부 관리용으로 사용하고 홈페이지 등록 또는
고객사 제출시에는 이 페이지는 빼고 PDF로 변환하여 제출
2) Data Sheet 제출시에는 누락된 부분이 없는지 다시 한번 확인
Top Related