Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
Transcript of Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
1/15
Fax Destination
231
7
To set label insertion
When Label Insertion is set to ON, the receiver's name and standard messagesare printed on the fax message when it is received at the other end.
A Press [Change] under Label Insertion.
B Press [On].
C Press [Change] under Line 2.
D Select the new standard message or press [Manual Entry] to enter the newmessage.
E Enter the new message, and then press [OK].
F Press [OK].
G Press [Change] under Line 3.
H Select the new standard message, and then press [OK].
I Press [OK].
Note
To change the name, key display and title, see "Changing a Registered Name".
Reference
p.214 Changing a Registered Name
Deleting a Fax Destination
Important
If you delete a destination that is a specified delivery destination, messages toits registered Personal Box, for example, cannot be delivered. Be sure to checkthe settings in the fax function before deleting any destinations.
A Press [System Settings].
B Press [Administrator Tools].
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
2/15
Registering Addresses and Users for Facsimile/Scanner Functions
232
7
C Press [Address Book Management].
D Press [Delete].
E Select the name whose fax destination you want to delete.Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail ad-dress, or IP-Fax destination.
F Press [Fax Dest.].
G Press [Change] under Facsimile No..
H Press [Delete All].
I Press [OK] twice.
J Press the {User Tools/Counter} key.
Note
To delete the name, key display, and title, see "Deleting a Registered Name".
Reference
p.215 Deleting a Registered Name
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
3/15
Fax Destination
233
7
IP-Fax Destination
This section describes how to register a IP-Fax destination.
Note For details about sending an IP-Fax, "Sending by IP-Fax", Facsimile Reference.
Reference
"Sending by IP-Fax", Facsimile Reference
Registering an IP-Fax Destination
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose IP-Fax destination you want to register.Press the name key, or enter the registered number using the number keys.
F Press [Fax Dest.].
G Press [Select Line], and then select [H.323] or [SIP].
H Press [Change] under "Fax Destination".
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
4/15
Registering Addresses and Users for Facsimile/Scanner Functions
234
7
I Enter the IP-Fax destination.
J Press [OK] twice.
Note
To register the name, see Registering Names".
Reference
p.212 Registering Names
p.217 Registering a User Code
p.259 Registering Names to a Group
"Entering Text", About This Machine
Changing a Registered IP-Fax Destination
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose IP-Fax destination you want to change.You can search by the registered name, fax number, folder name, e-mail ad-dress, or IP-Fax destination.
F Press [Fax Dest.].
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
5/15
Fax Destination
235
7
G Press [Change] under "Fax Destination".
H Enter the new destination, and then press [OK].
IPress [OK].
J Press [OK].
Note
To change the name, key display and title, see "Changing a Registered Name".
Reference
p.214 Changing a Registered Name
"Entering Text", About This Machine
Using the IPFax Destination as the sender
A Press [Protection].
B Press [Sender] under [Use Name as].
To change the IP-Fax Destination
A Press [Change] under [Use Name as].B Enter the new destination, and then press [OK].
To select the protocol
A Press [Select Line].
B Select [H.323] or [SIP].
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
6/15
Registering Addresses and Users for Facsimile/Scanner Functions
236
7
To program the SUB Code
A Press [Adv. Features], and then press [SUB Code].
B Press [Change] under TX SUB Code.C Enter the SUB Code, and then press [OK].
D To enter a password, press [Change] under Password (SID).
E Enter a password using the number keys, and then press [OK].
F Press [OK].
To program the SEP Code
A Press [Adv. Features], and then press [SUB Code].
B Press [Change] under RX SEP Code.
C Enter a SEP Code using the number keys, and then press [OK].
D To enter a password, press [Change] under Password (PWD).
E Enter a password using the number keys, and then press [OK].
F Press [OK].
To set the International TX Mode
A Press [Change] under International TX Mode.
B Select [Off] or [On], and then press [OK].
To select the fax header
A Press [Change] under Fax Header.
B Select [1st Name] or [2nd Name], and then press [OK].
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
7/15
Fax Destination
237
7
Deleting a Registered IP-Fax Destination
If you delete a destination that is a specified delivery destination, messages to itsregistered Personal Box, for example, cannot be delivered. Be sure to check the
settings in the fax function before deleting any destinations.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Press [Delete].
E Select the name whose IP-Fax destination you want to delete. Press thename key, or enter the registered number using the number keys.You can search by the registered name, fax number, folder name, e-mail ad-dress, or IP-Fax destination.
F Press [Fax Dest.].
G Press [Change] under "Fax Destination".
H Press [Delete All].
IPress
[OK]twice.
J Press the {User Tools/Counter} key.
Note
To change the name, key display and title, see "Changing a Registered Name".
Reference
p.214 Changing a Registered Name
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
8/15
Registering Addresses and Users for Facsimile/Scanner Functions
238
7
E-mail Destination
Register e-mail destinations so you do not need to enter an e-mail address everytime, and can send scan files from scanner or fax function by e-mail.
It is easy to select the e-mail destination if you register "Name" and "Key Dis-play" as the e-mail destination.
You can register e-mail destinations as a group.
You can use the e-mail address as the sender's address when sending scanfiles in scanner mode. If you want to do this, set a protection code on the send-er address to prevent unauthorized access.
Note
You can select an e-mail address from an LDAP server, and then register it in
the Address Book. See "Sending Scan File by E-mail", Scanner Reference. You can set the machine to send a Transmission Result Report by e-mail
whenever a transmission is sent. See Facsimile Reference You can set the ma-chine to send a Transmission Result Report by e-mail whenever a transmis-sion is sent. See Facsimile Reference.
Reference
p.269 Registering a Protection Code
Registering an E-mail Destination
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose e-mail address you want to register. Press the namekey, or enter the registered number using the number keys.
F Press [E-mail].
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
9/15
E-mail Destination
239
7
G Press [Change].
H Enter the e-mail address.
I Press [OK].J Select [E-mail / Internet Fax Destination] or [Internet Fax Destination Only].
K If you want to use internet fax, specify whether or not to use " Send viaSMTP Server".
L Press [OK].
Note
You can enter up to 128 characters for the e-mail address.
To register the name, see Registering Names".
Reference
p.212 Registering Names
p.217 Registering a User Code
p.260 Registering Names to a Group
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
10/15
Registering Addresses and Users for Facsimile/Scanner Functions
240
7
Changing an E-mail Destination
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose e-mail address you want to change.Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail ad-
dress, or IP-Fax destination.
F Press [E-mail].
G Press [Change] under E-mail Address.
H Enter the e-mail address, and then press [OK].
I Press [OK].
Note
To change the name, key display and title, see "Changing a Registered Name".
Reference
p.214 Changing a Registered Name
"Entering Text", About This Machine
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
11/15
E-mail Destination
241
7
Using the e-mail address as the sender
A Press [Protection].
B Press [Sender] under [Use Name as].
Deleting an E-mail Destination
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Press [Delete].
E Select the name whose e-mail address you want to delete.Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail ad-dress, or IP-Fax destination.
F Press [E-mail].
G Press [Change] under E-mail Address.H Press [Delete All].
I Press [OK] twice.
J Press the {User Tools/Counter} key.
Note
To delete the name, key display, and title, see "Deleting a Registered Name".
Referencep.215 Deleting a Registered Name
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
12/15
Registering Addresses and Users for Facsimile/Scanner Functions
242
7
Registering Folders
By registering a shared folder, you can send scan files to it directly.
There are three types of protocol you can use: SMB
For sending files to shared Windows folders.
FTPUse when sending files to an FTP server.
NCPUse when sending files to an Net- Ware server.
Note
For details about protocols, server names, and folder levels, consult your net-work administrator.
You can prevent unauthorized users from accessing folders from the ma-chine. See "Registering a Protection Code".
You can only select either SMB, FTP, or NCP. If you change protocol after fin-ishing your settings, all previous entries are cleared.
Using SMB to Connect
Note
To register a folder in an FTP server, see "Using FTP to Connect".
To register a folder in an NetWare server, see "Using NCP to Connect".
Reference
p.248 Using FTP to Connect
p.253 Using NCP to Connect
Registering an SMB Folder
A Press [System Settings].
B Press [Administrator Tools].
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
13/15
Registering Folders
243
7
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose folder you want to register. Press the name key, orenter the registered number using the number keys.
F Press [Auth. Info], and then press [Next].
G Press [Specify Other Auth. Info] on the right side of Folder Authentication.
H Press [Change] under Login User Name.
I Enter the login user name, and then press [OK].
JPress
[Change]under Login Password.
K Enter the password, and then press [OK].
L Enter the password again to confirm, and then press [OK].
M Press [Folder].
N Press [SMB].
O Press [Connection Test] to check the path is set correctly.
P Press [Exit].
Q Press [OK].
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
14/15
Registering Addresses and Users for Facsimile/Scanner Functions
244
7
R Press [Exit].
Note
To register the name, see Registering Names".
You can enter up to 64 characters for the user name. You can enter up to 64 characters for the password.
You can enter a path using up to 128 characters.
To specify a folder, you can either enter the path manually or locate thefolder by browsing the network.
If the connection test fails, check the settings, and then try again.
When [Do not Specify] is selected, the SMB User Name and SMB Passwordthat you have specified in Default User Name / Password (Send) of FileTransfer settings applies.
If User Authentication is specified, contact your administrator.
Reference
p.212 Registering Names
p.244 To locate the SMB folder manually
p.245 To locate the SMB folder using Browse Network
To locate the SMB folder manually
A Press [Change] under Path.
B Enter the path where the folder is located.
C Press [OK].If the format of the entered path is not correct, a message appears. Press [Exit],and then enter the path again.
Note
Enter the path using this format: "\\ServerName\Share- Name\PathName". You can also enter an IPv4 address.
You can enter a path using up to 128 characters.
-
7/27/2019 Wbiconda Wbrerdusite Wdarlbayuitopek 49z14513a0_5
15/15