Q.C.M Quality Control Management AG · 2021. 3. 8. · Q.C.M Quality Control Management AG CH-3123...
Transcript of Q.C.M Quality Control Management AG · 2021. 3. 8. · Q.C.M Quality Control Management AG CH-3123...
Schweizerische EidgenossenschaftConfëdëration suisseConfederazione SvizzeraConfederaziun svizra
0Swiss Confederation
Federal Office of Civil Aviation FOCA
Maintenance Training and ExaminationOrganisation Approval Cert ificate
rOC5-/
– PursuantttrReguIatiörf(EC) -Na'2018/1 139 of the European Parliament and of the Council and to CommissionRwWE(ELI)No -1-321/2Ö14, for the time being in force and subject to the condition specified below, theFederal Office of Civil Aviation of Switzerland hereby certifies:
Q.C.M Quality ControlManagement AGCH-3123 Belp, Eichholzweg 20-24
as a maintenance training organisation in compliance with Section A of Annex IV (Part-147) of Regulation (EU) No1321/2014, approved to provide training and conduct examinatËons listed in the approval schedule attached and toissue related certificates of recognition to students using the above references.
CONDITIONSnbBapprevaLiWr Iited to what is specified in the scope of work section of the approved maintenance training organisation
exposition as referfa'tD-irbseQjion A of Annex IV (Part-147); and2. this approval requires compliance Ü1th the p'rpcedures specified in the approved maintenance training organisation exposition;
3. this apprb%Ft&valid whilst the approved maintenance training organisation remains in compliance with Annex IV (Part-147) of
_ 4. subject to compliance with the forë'going conditions, this approval shall remain valid for an unlimited duration unless the
d--
Regulation (EU) No 1321/2014; and
hpWLaJ_Das previously been surrendered, superseded, suspended or revoked.
Date of original issue’Date of this revision:
huhn
03.03.201008.03.2021 Revision No: 18
of SaflAndreas Boss, Head of SectionTechnical Organisations Bern /
=====::d/
za;
Schweizerische EidgenossenschaftConfëdëration suisseConfederazione SvizzeraConfederaziun svizra
0Swiss Confederation
Federal Office of Civil Aviation FOCA
Maintenance Training and Examination Organisation Approval Schedule
Reference CH.147.0012
-u-h
K\-_
Organisation name: Q.C.M Quality Control Management AG
Date: 08.03.2021
ClassBasic
Licence categoryB1
B2
B1
LimitationTBI.1TB2T1T1
AEROPLANES TURBINEAVIONICSBombardier BD-100-IAI 0 (Honeywell AS907)Bombardier CL-600-2B16 (604 Variant) (GECF34)Cessna 560XLJXLS (PWC PW545)Falcon 900 (Honeywell TFE731 )Falcon 900EX (Honeywell TFE731 )Falcon 900EX EASy (Honeywell TFE731 )Learjet 35/36 (Honeywell TFE731 )Learjet 60 (PWC PW305)Learjet Model 45 (Honeywell TFE731 )Learjet 31 (Honeywell TFE731Learjet 35/36 (Honeywell TFE731 )Learjet 45 (Honeywell TFE731 )Bombardier CL-600-2B16 (604 Variant) (GECF34)Falcon 900EX (Honeywell TFE731 )Learjet 35/36 (Honeywell TFE731 )Learjet 60 (PWC PW305)Learjet Model 45 (Honeywell TFE731 )
TypefTasks
T1T1
T1
T1
T1T1
T1
T1 +T2T1 +T2T1 +T2T4
Bl+B2
C
T4T4T4T4
This approval schedule is limited to those trainings and examinations specified in the scope of work section of theapproved maintenance training organisation exposition.
Maintenance Training Organisation Exposition reference: MTOE V 13.0 dated 28.02.2021
Date of original issue: 01 .11.2009Date of this revision: 28.02.2021 Revision No: 28.02.2021/V 13,0
Head o}4afety Division AircraftAndreas Boss. Head of SectionTechnical Organisations Bern
EASA Form 11 issue 6