Publications Web of Science Scopus Stasiak-Betlejewska

Appendix 3

THE LIST OF RESPONSES TO THE CANDIDATE’S OUTCOMES

Name of Candidate: Ing. Renata Stasiak-Betlejewska, PhD.

Publications in Web of Science:

1. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata); Kaye, M (Kaye, Michael);

Dyason, M (Dyason, Marilyn); Stachova, K (Stachova, Katarina),

Edited by: Houska, M (Houska, M); Krejci I (Krejci, I); Flegl, M (Flegl, M)

Title: STUDENTS' EXPECTATIONS IN THE TECHNICAL UNIVERSITY SERVICES

QUALITY ASSESSMENT

Source: EFFICIENCY AND RESPONSIBILITY IN EDUCATION 2014

Pages: 767-774

Published: 2014

Conference Title: 11th International Conference on Efficiency and Responsibility in

Education

Conference Date: JUN 05-06, 2014

Conference Location: Prague, CZECH REPUBLIC

Sponsor(s): Czech Univ Life Sci, Fac Econ & Management

Times Cited in BIOSIS Citation Index: 0

Times Cited in Chinese Science Citation Database: 0

Times Cited in Russian Science Citation Index: 0

Times Cited in SciELO Citation Index: 0

Times Cited in Web of Science Core Collection: 0

Total Times Cited: 0

ISBN: 978-80-213-2468-8

Accession Number: WOS:000351960900101

2. Grzegorzewska, E (Grzegorzewska, Emilia); Stasiak-Betlejewska, R (Stasiak-

Betlejewska, Renata)

Title: The Influence of Global Crisis on Financial Liquidity and Changes in Corporate Debt

of the Furniture Sector in Poland

Source: DRVNA INDUSTRIJA

Volume: 65

Issue: 4

Pages: 315-322

DOI: 10.5552/drind.2014.1342

Published: 2014







ISSN: 0012-6772

eISSN: 1847-1153


3. Borkowski, S (Borkowski, Stanislaw); Stasiak-Betlejewska, R (Stasiak-Betlejewska,

Renata)

Edited by: Supin, HCM (Supin, HCM); Palus, H (Palus, H)

Title: THE CONCEPT OF SOCIAL RESPONSIBILITY IN THE WOODWORKING AND

FURNITURE INDUSTRY AS A RESPONSE TO THE GREEN ECONOMY NEEDS

Source: POSITION AND ROLE OF THE FOREST BASED SECTOR IN THE GREEN

ECONOMY: PROCEEDINGS OF SCIENTIFIC PAPERS

Pages: 18-23

Published: 2014

Conference Title: 7th International Scientific Conference on Position and Role of the Forest

Based Sector in the Green Economy

Conference Date: MAY 21-23, 2014

Conference Location: Tech Univ Zvolen, Zvolen, SLOVAKIA

Conference Host: Tech Univ Zvolen







ISBN: 978-953-57822-1-6


4. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata)

Edited by: Supin, HCM (Supin, HCM); Palus, H (Palus, H)

Title: FOREST PROMOTIONAL COMPLEX AS A PROMOTION TOOL FOR THE

SUSTAINABLE FOREST ECONOMY MANAGEMENT

Source: POSITION AND ROLE OF THE FOREST BASED SECTOR IN THE GREEN

ECONOMY: PROCEEDINGS OF SCIENTIFIC PAPERS

Pages: 147-152

Published: 2014

Conference Title: 7th International Scientific Conference on Position and Role of the Forest

Based Sector in the Green Economy

Conference Date: MAY 21-23, 2014

Conference Location: Tech Univ Zvolen, Zvolen, SLOVAKIA

Conference Host: Tech Univ Zvolen







ISBN: 978-953-57822-1-6


5. Sujanova, J (Sujanova, Jana); Gabris, P (Gabris, Peter); Licko, M (Licko, Miroslav);

Pavlenda, P (Pavlenda, Pavel); Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata)

Edited by: Cegarra, JG (Cegarra, JG)

Title: Aspects of Knowledge Management in Slovak Industrial Enterprises

Source: PROCEEDINGS OF THE 13TH EUROPEAN CONFERENCE ON KNOWLEDGE

MANAGEMENT, VOLS 1 AND 2

Pages: 1135-1144

Published: 2012

Conference Title: 13th European Conference on Knowledge Management (ECKM)

Conference Date: SEP 06-07, 2012

Conference Location: Univ Politecnica Cartagena, SPAIN

Conference Host: Univ Politecnica Cartagena







ISBN: 978-1-908272-64-5


6. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata); Borkowski, S (Borkowski,

Stanislaw)

Edited by: Rybansky, R (Rybansky, R); Novakova, R (Novakova, R)

Title: CLUSTER AS AN ELEMENT SUPPORTING PASSIVE WOODEN BUILDING

DEVELOPMENT

Source: WOOD AND FURNITURE INDUSTRY IN TIMES OF CHANGE - NEW

TRENDS AND CHALLENGES

Pages: 97-107

Published: 2012

Conference Title: 5th International Conference on Wood and Furniture Industry in Times of

Change - New trends and challenges (WoodEMA)


Conference Location: Trnava, SLOVAKIA

Sponsor(s): Univ Ss Cyril & Methodius; Univ Ss Cyril & Methodius, Rector; Fac Mass

Media Commun, Dean







ISBN: 978-80-8105-374-0


7. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata)

Edited by: Rybansky, R (Rybansky, R); Novakova, R (Novakova, R)

Title: EFFECTS OF PASSIVE HOUSE PROMOTING IN EUROPE

Source: WOOD AND FURNITURE INDUSTRY IN TIMES OF CHANGE - NEW

TRENDS AND CHALLENGES

Pages: 108-117

Published: 2012





Sponsor(s): Univ Ss Cyril & Methodius; Univ Ss Cyril & Methodius, Rector; Fac Mass

Media Commun, Dean







ISBN: 978-80-8105-374-0


8. Borkowski, S (Borkowski, Stanislaw); Stasiak-Betlejewska, R (Stasiak-Betlejewska,

Renata)

Edited by: Palus, H (Palus, H)

Title: ANALYSIS OF BENT FURNITURE PRODUCTION COSTS

Source: WOOD PROCESSING AND FURNITURE MANUFACTURING: PRESENT

CONDITIONS, OPPORTUNITIES AND NEW CHALLENGES

Pages: 109-115

Published: 2010

Conference Title: 3rd WoodEMA International Scientific Conference on Wood Processing

and Furniture Manufacturing - Present Conditions, Opportunities and New Challenges

Conference Date: OCT 06-08, 2010

Conference Location: Vyhne, SLOVAKIA

Sponsor(s): WoodEMA, i a







ISBN: 978-80-228-2160-5


Publications in Scopus:

1. Borkowski, K. S., Stasiak-Betlejewska, K. R., & Náprstková, N. (2011). The kaizen

philosophy in the aluminium products improvement. Manufacturing Technology, 11,

2-5. Retrieved from www.scopus.com

2. Borkowski, S., Stasiak-Betlejewska, R., & Torok, A. (2013). Theoretical investigation

of supply chain service level in hungary and poland. Transport and

Telecommunication, 14(2), 93-101. doi:10.2478/ttj-2013-0008

3. Czajkowska, A., & Stasiak-Betlejewska, R. (2015). Quality management tools

applying in the strategy of logistics services quality improvement. Serbian Journal of

Management, 10(2), 225-234. doi:10.5937/sjm10-8095

4. Czajkowska, A., Stasiak-Betlejewska, R., & Borade, A. B. (2015). Analysis of quality

control results in the lift truck elements production. Periodica Polytechnica

Transportation Engineering, 43(3), 168-171. doi:10.3311/PPtr.7962

5. Deshmukh, S. J., Stasiak-Betlejewska, R., Ingole, S., & Bhuyar, L. (2014). DSS for

rural domestic energy planning - case study of a block in central india. International

Journal of Energy Sector Management, 8(1), 27-55. doi:10.1108/IJESM-06-2013-

0007

6. Grladinović, T., Perić, I., Stasiak-Betlejewska, R., & Škoda, P. (2013). Increasing the

productivity of enterprises with the 20 keys method. Paper presented at the 24th

International Scientific Conference: Wood is Good - User Oriented Material,

Technology and Design, Proceedings, 35-40. Retrieved from www.scopus.com

7. Grzegorzewska, E., & Stasiak-Betlejewska, R. (2015). The influence of global crisis

on financial liquidity and changes in corporate debt of the furniture sector in poland.

[Utjecaj svjetske krize na financijsku likvidnost i promjene u dugovanjima korporacija

u sektoru proizvodnje namještaja u Poljskoj] Drvna Industrija, 65(4), 315-322.

doi:10.5552/drind.2014.1342

8. Perić, I., Grladinović, T., Starčević, I., & Stasiak-Betlejewska, R. (2013). On

enhancing of production planning in wood processing and furniture manufacturing.

Paper presented at the 24th International Scientific Conference: Wood is Good - User

Oriented Material, Technology and Design, Proceedings, 119-125. Retrieved

from www.scopus.com

9. Stacho, Z., & Stasiak-Betlejewska, R. (2014). Approach of organisations operating in

slovakia to employee's performance evaluation. Economic Annals-XXI, 5-6, 82-85.

Retrieved from www.scopus.com

10. Stasiak-Betlejewska, R. (2015). Construction product quality improvement with

applying production problems analysis. Manufacturing Technology, 15(5), 756-761.


11. Stasiak-Betlejewska, R. (2013). Constructions of the energy-saving wooden houses

and its advantages on the example of polish construction. Paper presented at the 24th

International Scientific Conference: Wood is Good - User Oriented Material,

Technology and Design, Proceedings, 143-150. Retrieved from www.scopus.com

12. Stasiak-Betlejewska, R. (2015). Value engineering application in the american

transportation industry. Periodica Polytechnica Transportation Engineering, 43(4),

206-210. doi:10.3311/PPtr.8448

13. Stasiak-Betlejewska, R. (2012). Value engineering as the way of quality problems

solving in the steel construction management. Manufacturing Technology, 12(13)


14. Stasiak-Betlejewska, R., & Borkowski, S. (2014). The machines operation

effectiveness in the furniture production in the context of toyota production system

applying. Paper presented at the 25th International Scientific Conference: New

http://www.scopus.com/







Materials and Technologies in the Function of Wooden Products, Proceedings, 113-

119. Retrieved from www.scopus.com

15. Sujanova, J., Gabris, P., Licko, M., Pavlenda, P., & Stasiak-Betlejewska, R. (2012).

Aspects of knowledge management in slovak industrial enterprises. Paper presented at

the Proceedings of the European Conference on Knowledge Management, ECKM, ,

2 1135-1144. Retrieved from www.scopus.com

A. List of works cited in publications by other authors listed in SCI, SSCI

Work cited no. 1 (unabridged quotation including the IF):

2) (unabridged quotation including the IF)


Responses: 1) (unabridged quotation including the IF)

2) (unabridged quotation including the IF)

Work citated no. 1

Title: CLUSTER AS AN ELEMENT SUPPORTING PASSIVE WOODEN BUILDING

DEVELOPMENT

Author(s): Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata); Borkowski, S (Borkowski,

Stanislaw)

Edited by: Rybansky R; Novakova R

Source: WOOD AND FURNITURE INDUSTRY IN TIMES OF CHANGE - NEW TRENDS

AND CHALLENGES Pages: 97-107 Published: 2012

Times Cited in Web of Science: 1


Cited Reference Count: 8

Abstract: Cluster is effective element which can support innovative activity realized on

analyzed region. Cluster is also an example of promoting different companies' network acting

for sharing knowledge among enterprises acting in the same branch. An article shows cluster's

idea concerning wooden and passive building realized in polish conditions.


Language: English

Document Type: Proceedings Paper





Conference Sponsors: Univ Ss Cyril & Methodius, Univ Ss Cyril & Methodius, Rector, Fac

Mass Media Commun, Dean

Author Keywords: region; cluster; competition; enterprise

Addresses: [Stasiak-Betlejewska, Renata; Borkowski, Stanislaw] Czestochowa Tech Univ,

Fac Management, Inst Prod Engn, PL-42201 Czestochowa, Poland.

Reprint Address:

E-mail Addresses: [email protected]

Publisher: UNIV SS CYRIL & METHODIUS TRNAVA-UCM TRNAVA

Publisher Address: FAC MASS MEDIA COMMUNICATION, NAM J HERDU 2 917 01,



TRNAVA, SLOVAK REPUBLIC 2012, SLOVAKIA

Web of Science Categories: Business; Management

Research Areas: Business & Economics

IDS Number: BDJ64

ISBN: 978-80-8105-374-0

Source Item Page Count: 11


By: Greger, K (Greger, Kresimir); Segotic, K (Segotic, Ksenija); Grladinovic, T (Grladinovic,

Tomislav); Blcanic, K (Bicanic, Kristina); Peric, I (Peric, Ivana)

Title: CRITERIA RANKING IN ASSESSING TECHNOLOGICAL PROCESS

CAPABILITY IN FURNITURE MANUFACTURING

Source: SUMARSKI LIST

Volume: 137

Issue: 5-6

Pages: 279-285

Published: 2013

Abstract: Today's trend of world market globalization, competition and ever greater demands

of customers have highlighted the quality of products and services as the key factor in

conquering the market. It all impacts wood processing and furniture manufacturing in the

Republic of Croatia due to its constant orientation to export as the only way of achieving

market competitiveness.

Research polygons were two factories of board furniture. Relevant data for considered

products were gathered over 1.5 years, and then processed to determine factors with strongest

influence on the process capability of each polygon. The criteria for determining

technological processes capability were selected using Analytic Hierarchy Process (AHP)

method. Research has shown that the most influencing criteria on technological process

capability are human, material and machine. Based on obtained results, this paper is a

contribution to the discussion on traditional and modern quality assurance models, and

represents scientific grounds for implementing a suitable stability and capability model.

Times Cited in Web of Science: 0





ISSN: 0373-1332


Work citated no. 2

Title: Aspects of knowledge management in Slovak industrial enterprises

(2012) Proceedings of the European Conference on Knowledge Management,

ECKM, 2, pp. 1135-1144. Cited 4 times.

Authors: Sujanova, J.a , Gabris, P.

a , Licko, M.

a , Pavlenda, P.

a , Stasiak-Betlejewska, R.

b

a Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in

Bratislava, Trnava, Slovakia b Faculty of Management, Czestochowa University of Technology, Czestochowa, Poland

Abstract: The article deals with the different aspects of the knowledge management. The first

part of the article is the analysis of the knowledge management on the governmental level -

specifically the Slovak Republic knowledge economy strategy Minerva 2.0. It is focused on

the impact of this strategy on the four main areas: innovations, human resources, research and

development and information and communication technologies with the emphasis on the

industrial enterprises. As a source for the analysis have been used data from the Statistical

Office of the Slovak Republic and EU surveys and reports like: Innovation Union Scoreboard

2011, The Global Information Technology Report 2012, Innovation Union Competitiveness

report 2011 and others. The results of the analysis brought up several problem areas:

financing of the research and development, integration of the Slovak research and

development in the EU research area, disproportion between the number of the technical

sciences and theory graduates and industrial enterprises demands, participation and in EU

research programmes like FP7. Second part of the article pay attention to the knowledge

management maturity level in Slovak industrial enterprises. The assessment was oriented on

the culture, structure and technologies. For those areas was designed the questionnaire for the

qualitative research of the knowledge management maturity in Slovak industrial enterprises.

The article contains selected questions oriented on the knowledge strategy implementation, C

level management participation in the knowledge management strategy implementation,

orientation of the innovation activities, knowledge areas and organizational culture

orientation. Results of the knowledge management maturity level in Slovak industrial

enterprises does not allowed us to define correlations between the selected knowledge

management areas. The main conclusion from the presented analyse is the disparity between

the strategy and its implementation. There is not a clear direction between the knowledge

strategy, knowledge areas, innovation activities and organizational culture. The knowledge

management implementation in industrial enterprises does not have stable pillars to support

the incorporation of the knowledge management process into the business process.

Author Keywords

Industrial enterprises; Innovation; Knowledge economy; Knowledge management maturity;

Knowledge strategy; Organizational culture

Index Keywords

Business Process, Global information technology, Industrial enterprise, Information and

Communication Technologies, Innovation activity, Knowledge areas, Knowledge

economy, Knowledge management strategy, Knowledge strategy, Level

management, Maturity levels, Organizational cultures, Problem areas, Qualitative

research, Research and development, Research programmes, Slovak Republic, Statistical

Offices, Technical science; Competition, Information technology, Innovation, Knowledge

management, Research, Surveys; Management science

Conference name: 13th European Conference on Knowledge Management, ECKM 2012

Conference date: 6 September 2012 through 7 September 2012

Conference location: Cartagena

Conference code: 94375

ISSN: 20488963

ISBN: 9781908272638

Language of Original Document: English

Abbreviated Source Title: Proc. Eur. Conf. Knowl. Manage., ECKM

Document Type: Conference Paper

Source: Scopus


Relich, M.a , Witkowski, K.

a , Saniuk, S.

a , Šujanová, J.

b

Material demand forecasting: An ERP system perspective

(2014) Applied Mechanics and Materials, 527, pp. 311-314. a University of Zielona Góra, Poland

b Slovak University of Technology in Bratislava, Institute of Industrial Engineering,

Management and Quality, Slovakia

Abstract

This paper investigates various problems associated with the parameter specification for

material requirements planning (MRP) in a typical ERP system. The choice of a suitable MRP

procedure and its parameters can reduce excessive quantities of materials and, consequently,

cost. The proposed approach is dedicated for MRP procedure based on the forecasting of

material demand and inventory that can be obtained with the use of techniques for nonlinear

function identification, such as fuzzy-neural system and neural networks. An example is

presented which compares the different forecasting models for material demand and

inventory. © (2014) Trans Tech Publications, Switzerland.

Author Keywords

Inventory management; Logistics; Lot size; Material requirements planning


Source: Scopus


Relich, M.

Knowledge acquisition for new product development with the use of an ERP database

(2013) 2013 Federated Conference on Computer Science and Information Systems, FedCSIS

2013, art. no. 6644180, pp. 1285-1290. Cited 1 time.

University of Zielona Gora, ul. Licealna 9, 65-216 Zielona Gora, Poland

Abstract

Nowadays, a considerable number of enterprises develop new products using an Enterprise

Resource Planning (ERP) system. One of the modules of a typical ERP system concerns

project management. Functionalities of this module consist of defining resources, company

calendars, sequence of project tasks, task duration etc. in order to obtain a project schedule.

These parameters can be defined by the employees according to their knowledge, or they can

be connected with data from previous completed projects. The paper investigates using an

ERP database to identify critical factors, i.e. variables that significantly influence on new

product development. Project duration and cost is estimated by a fuzzy neural system that

uses data of completed projects stored in an ERP system. © 2013 Polish Information

Processing Society.


Source: Scopus


Stacho, Z.a , Urbancová, H.

b , Stachová, K.

a

Organisational arrangement of human resources management in organisations operating in

Slovakia and Czech Republic

(2013) Acta Universitatis Agriculturae et Silviculturae Mendelianae

Brunensis, 61 (7), pp. 2787-2799. a School of Economics and Management in Public Administration in Bratislava, Department

of Management, Furdekova 16, 851 04 Bratislava, Slovakia

b Faculty of Economics and Management, Czech University of Life Sciences Prague,

Kamycka 129, 165 21 Praha 6-Suchdol, Czech Republic

Abstract

A necessary condition of effective functioning of human resources management in an

organisation is the creation of adequate organisational conditions including the existence of a

human resources management department, its size, composition and responsibility, which are

formed following particular conditions of the given organisation. Competitive environment of

organisations operating in Slovakia and Czech Republic is growing with the process of world

economy globalisation, and it brings the need of flexibility in management, and therefore we

have to get used to changes also in the sphere of human resources management, and learn to

cope with new impulses and situations. At present, that predominantly includes spreading

effects of global financial and economic crisis, influencing all spheres of life in Slovakia and

in Czech Republic too. Handling this situation presupposes flexibility in assessment of

changes in environment where organisations operate, ability to detect all positive as well as

negative impacts and situations, and formulation of measures to enhance their own position

sensibly and cautiously. Due to the need of focusing of organisations on comprehensive

arrangement of human resources management, in questionnaire researches, we focused on

finding out whether and to what extent organisations operating in Slovakia (n = 340) and in

Czech Republic (n = 109) focus on human resources management arrangement. The objective

of the article is to compare results in the sphere of human resources in organisations operating

in Slovak and Czech Republics. The results show that 67% organisations in Slovakia and only

43% in the Czech Republic had a human resources management department which realised

followed human resources management functions and personnel strategy.

Author Keywords

Functional strategies; Human resources management; Human resources management

departments; Organisational strategy; Organisations operating in Slovakia; Outsourcing of

personnel activities

Document Type: Article

Source: Scopus

Work citated no.3

Stasiak-Betlejewska, R.

Value engineering as the way of quality problems solving in the steel construction

management

(2012) Manufacturing Technology, 12 (13), . Cited 2 times.

Institute of Production Engineering, Czestochowa University of Technology, Al. Armii

Krajowej 19B, 42-200 Czȩstochowa, Poland

Abstract

The study aim was discussion on the steel construction production with regard to quality

problems and its analysis by using value engineering. The most important elements of the

work should, however, discuss how an important factor for the company's production and

quality management are. Based on this explicit purpose developed the following hypothesis:

identification of the nonconformities location in the production process of steel constructions

and its causes contributes to the production improvement. The research result is identification

of nonconformities formation areas and presentation of the production process improvement

methodology by applying of quality tools and value engineering idea as well. The research

object was chosen company producing steel constructions for buildings. The examination

research findings come from 2011 year.

Author Keywords

Production management; Quality; Steel construction; Value engineering


Source: Scopus


Dian, M. The methodology of quality matrix in manufacturing quality process improvement

(2013) Manufacturing Technology, 13 (4), pp. 431-437.

Faculty of Technology and Production Management, University of J. E. Purkyne in Usti nad

Labem, Na Okraji 1000, 40096 Usti nad Labem, Czech Republic

Abstract

In each industrial entrepreneur organization around the globe a three dimensional objective

well known under the abbreviation QCD (Quality, Costs, and Delivery) is examined, pursued,

and evaluated on daily basis. The nowadays crucial philosophy pertaining to process

improvement in terms of quality assurance and significant cost reduction is that: "The quality

must be manufactured and not controlled up". In order to be successful on the market place it

is necessary to orchestrate, implement and carry out an advanced production quality assurance

system with appropriate tools of course accompanying with previously precisely organized

prototype and preserial stages of production. The article deals with a proposal of adequate

methodology and the experimental implementation of quality matrix into manufacturing

process assurance in order to improve a quality level and the whole QCD.© 2013 Published

by Manufacturing Technology.

Author Keywords

Process improvement; Quality assurance; Quality matrix; Quality tools


Source: Scopus


Polach, P. Utilization of multibody simulations at the trolleybus development

(2013) Manufacturing Technology, 13 (4), pp. 515-520.

Section of Materials and Mechanical Engineering Research, Research and Testing Institute

Pilsen, Czech Republic

Abstract

šKODA VÝZKUM s.r.o. (now VÝzkumnÝ a zkušebnÍ ústav Plzeň s.r.o.) cooperated on the

development of the NEOPLAN DMA low-floor articulated trolleybus intended for the Boston

city (the United States). Multibody modelsand finite element models of the trolleybus were

utilized in the stage of the vehicle design. The multibody modelsof the trolleybus were created

in the Alaska simulation tool and the simulations (running over a large road unevenness,start,

braking and driving through a bend) were aimed at determining forces acting in the

trolleybussuspension elements and radius rods. Time histories of the forces calculated using

multibody models were used asthe input data of the trolleybus finite element models.

Utilizing the finite element models the critical places of thetrolleybus body structure from the

point of view of high stresses were determined. At the measurement with thereal trolleybus

prototype these places were provided with strain gauges. © 2013 Published by Manufacturing

Technology.

Author Keywords

Constructional design; Dynamics; Multibody model; Trolleybus


Source: Scopus

Work citated no.4

Borkowski, K.S.a , Stasiak-Betlejewska, K.R.

a , Náprstková, N.

b

The Kaizen philosophy in the aluminium products improvement

(2011) Manufacturing Technology, 11, pp. 2-5. Cited 4 times. a Institute of Production Engineering, Czestochowa University of Technology, Al. Armii

Krajowej 19 B, 42-200 Czestochowa, Poland b Institute of Technology and Production Management, Jane Evangelista Purkyne University

in Ústí nad Labem, Pateurova 7, 400 01 Ústí nad Labem, Czech Republic

Abstract

Kaizen strategy is the most important Japanese management concept. Supporters of this by all

means an interesting management philosophy consider it as a basis for achieving success by

the company. The analyzed company X Stainless motivated by others companies market

successes decided to deepen the knowledge of the Kaizen philosophy, which resulted in the

implementation of this method of management in its ranks. The essence of Kaizen is to

change ways of thinking and way of production management. Underlying this theory, there is

the gradual but constant improvement of the status quo with the active involvement of every

management employee and the rest of the company workers. Kaizen educates employees

towards finding ways to better perform their duties. Performance of work is closely connected

with the observance of standards and the introduction of small improvements in order to

continue its improvement.

Author Keywords

Improvement; Kaizen; Quality


Source: Scopus


Nová, I., Machuta, J.

Squeeze casting results of aluminium alloys

(2013) Manufacturing Technology, 13 (1), pp. 73-79. Cited 4 times.

Faculty of Mechanical Engineering, Department of Engineering Technology, Technical

University of Liberec, Czech Republic

Abstract

The paper deals with a squeeze casting process. This process added a new knowledge in to

research in the branch by crystallization of aluminium alloys. Due to this purpose there was

designed a special tool, which was placed on hydraulic press. The squeeze casting was carried

out on an aluminium alloy (AlSi12, with 12 % silicon). The main aim was study of the

aluminium alloy structure, which was established at a pressure of crystallizing melt. In this

way of the material crystallization was produced a truncated cone part with the larger the base

(ø 100 mm × 105 mm). The structure of specimens was monitored on a light microscope and

was evaluated by means of software NIS Elements. The main results of the pressure melt to

fine crystalline structure, which is represented fine dendrites both on surface and in an interior

parts of the processed material. The influence of this pressure on the mechanical properties

was monitored too. © 2013 Published by Manufacturing Technology.

Author Keywords

Alloy AlSi12; Crystallization; Pressure; Structure


Source: Scopus


Greger, K., Šegotić, K., Grladinović, T., Bičanić, K., Perić, I.

Criteria ranking in assessing technological process capability in furniture manufacturing

[Rangiranje kriterija pri utvrdivanju sposobnosti tehnološkog procesa u proizvodnji

namještaja] (2013) Sumarski List, 137 (5-6), pp. 279-285.

Šumarski Fakultet Sveučilišta u Zagrebu, Svetošimunska 25, 10002 Zagreb, Croatia

Abstract

Today's trend of world market globalization, competition and ever greater demands of

customers have highlighted the quality of products and services as the key factor in

conquering the market. It all impacts wood processing and furniture manufacturing in the

Republic of Croatia due to its constant orientation to export as the only way of achieving

market competitiveness. Research polygons were two factories of board furniture. Relevant

data for considered products were gathered over 1.5 years, and then processed to determine

factors with strongest influence on the process capability of each polygon. The criteria for

determining technological processes capability were selected using Analytic Hierarchy

Process (AHP) method. Research has shown that the most influencing criteria on

technological process capability are human, material and machine. Based on obtained results,

this paper is a contribution to the discussion on traditional and modern quality assurance

models, and represents scientific grounds for implementing a suitable stability and capability

model.

Author Keywords

AHP method; Furniture manufacturing; Quality; Technological process capability and

stability


Source: Scopus


Michna, Š., Náprstková, N.

The use of fractography in the analysis of cracking after formed workpiece blank mechanical

machining from the ALCuSnBi alloy

(2012) Manufacturing Technology, 12 (13), .

Faculty of Production Technology and Mamagement, Department of Technology and

Material Engineering, Jan Evangelista Purkyně University in Ústí nad Labem, Na Okraji

1001, 400 01 Ústí nad Labem, Czech Republic

Abstract

The aim of the performed works was research on the causes of formed aluminum blanks

cracking in the range of the AlCuSnBi alloy rods where cracks appear during mechanical

machining (turning, drilling) of this range to the final part. AlCuSnBi alloy was invented as a

substitute for aluminum machining alloys Al - Cu type alloyed with lead. For the alloy were

performed qualitative and quantitative fractographic analysis of the fracture surface after

machining in order to determine possible causes cracking of the material and thus his lack of

strength during machining. Part of this paper is to the overall theoretical analysis of the issue.

This paper clearly documents that fractographic analysis methods can significantly and to the

extent required to provide answers to the causes of insufficient material strength during

machining. Also points out the possible causes of cracks in this alloy during machining and

ways to eliminate them.

Author Keywords

AlCuSnBi alloy; EDX analysis; Fractographic analysis; Machining


Source: Scopus

B. List of works cited in publications by other authors not listed in SCI, SSCI


Stasiak-Betlejewska, R., Borkowski, S., (2009) Controlling w odniesieniu do systemu

produkcyjnego. [In:] Cele i uwarunkowania funkcjonowania współczesnych przedsiębiorstw.

Red.nauk. Janusz Dworak, Tadeusz Falencikowski. Wyd.Wyż.Szk.Bank. Gdańsk. p.77-90

ISBN 978-83-61712-12-1

Responses:

Prístavka, M., Bujna, M., Korenko, M., Reliability monitoring of grain harvester in operating

conditions [Sledovanie spol'ahlivosti obilného kombajnu v prevádzkových podmienkach]

(2013) Journal of Central European Agriculture, 14 (4), pp. 1436-1443.


Stasiak-Betlejewska, R., Borkowski, S., Stability of the quality of pipes of the seam

(2007) Quality Materials Improvement, EDIS Publishing company, University of Żilina,

Żilina, Slovakia,. ISBN 978 - 80 - 8070742-2

Responses:

1) Naprstkova, N., Michna, S., Identification and evaluation of machining product defects in

teaching of students at college, (2013) Engineering for Rural Development, pp. 569-572.


Stasiak-Betlejewska, R., Borkowski, S.,Assessment of the CNC Machine Modernity Basing

on the ABC Technology Method (2009) W:TRANSCOM 2009. 8-th European Conference of

Young Research and Scientific Workers. Proceedings. Section 2. Economics and

Management., pp. 19-22. Żilina: University of Îilina, ISBN 978-80-554-0041

Responses:

Vetráková, M.a , Potkány, M.

b , Hitka, M.

b, Outsourcing of facility management [Outsourcing

facility managementu] (2013) E a M: Ekonomie a Management, 16 (1), pp. 80-92.


Borkowski, S., Stasiak-Betlejewska, R., Analysis of anti-corrosion coating process on steel

constructions, (2010) Manufacturing technology, 10, pp. 27-29. ISSN1213-2489

Responses:

Kuśmierczak, S., Svobodová, J., Microscopic Evaluation of Protective Coating by Coated

Sheets after Corrosion Load, (2012) Manufacturing Technology, 12 (13).


Selejdak, J., Stasiak-Betlejewska, R., Determinants of quality of printing on foil (2007) J.

Machine Eng., 7 (2), pp. 111-117

Responses:

Horváth, E.a , Hénap, G.

b , Török, A.

c , Harsányi, G.

a , Mechanical characterization of glass-

ceramics substrate with embedded microstructure (2012) Journal of Materials Science:

Materials in Electronics, 23 (12), pp. 2123-2129.

http://www.scopus.com/record/display.url?eid=2-s2.0-84890503008&origin=resultslist












Stasiak-Betlejewska, R., Borkowski, S., Contemporary Developmental Orientations in the

Production on the Example of the Furniture Branch (2007) Nove Trendy V Manazerstve

Kvality, pp. 18-22.

3 rocnik medzinarodnoho seminara pedagogov studijneho programu Kvalita produkcie.

Zbornik prednasok. Trnava

Responses:

Jelačić, D.a , Oblak, L.

b , Petrović, S.

c , Moro, M.

a , Barčić, A.P.

a , Ćošić, V.

d , Meloska, Ž.

e

Wood sector media promotion in some South-East European countries [Medijska promocija

drvnog sektora u nekim zemljama jugoistočne europe] (2012) Drvna

Industrija, 63 (3), pp. 195-203.


Borkowski, S., Stasiak-Betlejewska, R., Analysis of Bent Furniture Production Costs

(2010) Wood Processing and Furniture Manufacturing: Present Conditions, Opportunities

and New Challenges, pp. 109-115. Vyhne

Responses:

Potkány, M.a , Hajduková, A.

a , Teplická, K.

b Target costing calculation in the woodworking

industry to support demand at a time of global recession [Ukierunkowane kosztorysowanie w

przemyśle drzewnym w celu wsparcia popytu w okresie światowej recesji]

(2012) Drewno, 187, pp. 89-104.


Stasiak-Betlejewska, R., Borkowski, S., The Role of a Foreign Capital in a Process of the

Computerization of the Polish Bank Sector (2007) Ekonomika: Problemi teorii ta

praktiki, pp. 1749-1759. [In:] Zbornik naukovich prac'. Vip. 231. T. IX. Dnipropetrovs'k:

Wyd. DNU 2007

Responses:

Merková, M.a , Drábek, J.

b , Jelačić, D.

c, Determinants of effects of foreign direct investment

in terms of Slovak Republic and wood-processing industry of Slovakia [Odrednice

učinkovitosti izravnih stranih ulaganja u uvjetima poslovanja Republike Slovačke i slovačke

drvoprerad{stroke}ivačke industrije] (2012) Drvna Industrija, 63 (2), pp. 129-142.


Borkowski, S., Stasiak-Betlejewska, R., Náprstková, N., The importace assessment of the

control and the standardization in the furniture production (2010) Strojírenská

Technologie, 14, p. 25. FVTM UJEP Ústí nad Labem

Responses:

Muller, M. Polymeric composites based on AL 2O 3 reinforcing particles (2011) Engineering

for Rural Development, pp. 423-427.

Work cited no.10 (unabridged quotation including the IF):

Stasiak-Betlejewska, R., Borkowski, S., An Analysis of Organisational Structures of Banks of

Poland (2008) Human Resource Management and Ergonomics, 2 (2), pp. 54-62. ISSN 1337-

0871

Responses:

Blašková, M., Creative proactive-concluding theory of motivating [Kūrybinguma skatinanti

motyvavimo teorija] (2010) Business: Theory and Practice, 11 (1), pp. 39-48.














Stasiak-Betlejewska, R., Rosak, J. The TOWS and SWOT method as the management

strategy of hospitals in Poland [In:] TRANSCOM 2007 7-th European Conference of Young

Research and Scientific Workers, Proceedings, Section 2, Economics and Management, Part

II L-Z, Zilina, Slovak Republic

Responses:

Khaminich, S.Y., Kasian, S.Y., Marketing priorities of commodity positioning at change of

enterprises financial flows, (2008) Actual Problems of Economics, (8), pp. 130-137.


Stasiak-Betlejewska, R., Rosak, J., Machelski, W., The accreditation and the ISO 9001:2000

system as quality determinants of medical services in Poland [In:] TRANSCOM 2007. 7-th

European Conference of Young Research and Scientific Workers, Proceedings, Section 2,

Economics and Management, Part II L-Z, Zilina, Slovak Republic

Responses:

Khaminich, S.Y., Kasian, S.Y., Marketing priorities of commodity positioning at change of

enterprises financial flows, (2008) Actual Problems of Economics, (8), pp. 130-137.


Sujanova, J.a , Gabris, P.

a , Licko, M.

a , Pavlenda, P.

a , Stasiak-Betlejewska, R.

b

a Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in

Bratislava, Trnava, Slovakia, Aspects of knowledge management in Slovak industrial

enterprises (2012) Proceedings of the European Conference on Knowledge Management,

ECKM, 2, pp. 1135-1144.

Responses:

Stacho Z., Urbancová H., Stachová K., Organisational arrangement of human resources

management in organistaion operating in Slovakia and Czech Republic, Acta Universitatis

Agriculturae et Silviculturae Mendalianae, Vol. LXI No 7/2013. p. 2787-2799.


Stasiak-Betlejewska R., Piasecki P., Analysis of workers satisfaction in company logistic

operator. [In:] Human potential management in a company – Knowledge increase. Trnava:

AlumniPress, p.33-42. ISBN 978-80-8096-144-2.

Responses (1):

Kachanaková A., Stacho Z., Stachová K., Vybrane funckie riadenia ludskych zdrojov v

kontente zmien externeho prostredia organizacii, Zbornik prispevkov z medzinarodnej

redeckiej konferencje „Ekonomicky a socialny rozvoj Slovenska.Efektivnost verejnej spray –

Male a stredne podnikanie – europske hospodarstwo”, Vysoka Skola Ekonomie a

Manazementu verejnej spravy v Bratislave, p. 209 – 218. ISBN: 978-80-89600-07-6

Responses (1):

Stachová K., Stacho Z., Focus of organizations operating in Slovakia on organizational

culture, Management: Science and Education. Faculty of Management Science and

Informatics, University of Żilina, Institute of Management by University of Żilina. EDIS. p.

79-82.

Responses (3):

Stachová K., Stacho Z., Creation of innovative environment in industrial enterprises. Journal

Derew No2-3/2-13. p. 25-31. ISSN 0011-9008.

Responses (4):

Stachová K., Job analysis as a cross-selection function of human resource management.

MEST Journal. No July 2013. P.127-135. DOI 10.12709/mest.01.01.02.12






Rosak J., Stasiak-Betlejewska R., Clients’/Patients’ Satisfaction in Context of Medical

Services Quality. [In:] Human Resource Management and Ergonomics. Vol. II (2) 2008. p.47-

53. ISSN 1337-0871.

Responses:

Blasková M., Motivovanie l’udskeho potenciálu – modely, odporucania a inspircie. Żilinska

Univerzita v Żilinie v EDIS. 2012. CD. ISBN 978-80-554-0555-1.


Borkowski S., Stasiak-Betlejewska R., Identification of the Production Process Determinants

[In:] In Economy and Managemnet of Companies 2013. Medzinarodna vedecka konferencia,

2013. Zvolen. Technicka Univerzita vo Zvolene, p.44-51. ISBN 978-80-228-2565-8

Responses (1):

J. Sekulova, I. Nedeliak, Nove Skusenosti z Modelovania Informacnych a Business Procesov

v żeleznicej nakladnej preprave. Svet Dopravy. Vedecky – recenzowany online casopis. ISSN

1338-9629.

Responses (2):

E. Nedeliakova, J. Sekulova, I. Nedeliak, Nove moznosti integrovanych dopravnych systemov

v SR. Svet Dopravy. Vedecky – recenzowany online casopis. ISSN 1338-9629.


Konstanciak M., Stasiak-Betlejewska R., Borkowski S. 2010. Ważność elementów dachu

domu Toyoty w polskiej hucie. „Hutnik-Wiad.Hut.” R.77 nr 9. p.551-553.

Responses (1):

S. Borkowski, R. Ulewicz, P. Szklarzyk, The quality of glass packaging, Chapter 3. Quality in

the Toyota’s management principles. Borkowski S., Konstanciak M. (ed.) Samara. p. 43-58.

ISBN 978-5-98941-149-8.

Responses (2):

Konstanciak M., Jagusiak M.: Chapter 7. Characteristic of immaterial stores in the company

of steel constructions. [In:] Toyotarity. Knowledge using in service management. Ed. and

Scientific Elaboration Stanisław Borkowski, E.B. Tsoy. Publisher PTM, Warszawa 2010,

p.77 - 92 ISBN 978-83-61949-24-4.

Responses (3):

Selejdak J., Konstanciak M., Knop K. 2012. The Identification of Factors Determining Fabric

Quality. Chapter 7. W: Toyotarity. Quality and Machines Operating Conditions.

Monography. Editing and Scientific Elaboration Stanisław Borkowski, Jacek Selejdak.

Faculty of Logistics, University of Maribor, Celje. p. 75-87. ISBN: 978-961-6562-58-4.


Borkowski S., Stasiak-Betlejewska R. 2008. An Analysis of Toyota Principles Meaning in the

Production Company on the Example of the Mill [In:] Controlling a manazerstvo kvality v

podnikoch. Medzinarodna vedecka konferencia. Zvolen, Slovenska republika, p.85-91.

Responses:

Borkowski S., Krynke M., Pleszyniak M. Improvement of the Books Quality. Chapter 4. [In:]

Quality Product Improvement. Monography. Editing and Scientific Elaboration Stanisław

Borkowski, Robert Ulewicz. Publish.TRIPSOFT. Trnava 2011. p.45-54.


Konstanciak M., Stasiak-Betlejewska R., Borskowki S. 2010. Produkcja opakowań z tektury

falistej. Logistyka No 4, pp.78-81

Responses:

Ingaldi M., Jagusiak-Kocik M. Productivity of the Production System as the Measurements of

Its Production Effects. Chapter 12. [In:] Product Quality Improvement and Companies'

Competitiveness. Monography. Editing and Scientific Elaboration Stanisław Borkowski,

Manuela Ingaldi. University of Malibor, Celje Słowenia 2013, s.144-154, 133-143 978-961-

6562-69-0


Knop K., Jagusiak M., Stasiak-Betlejewska R.: Chapter 12. The application of ABC and

FMEA method to define critical parts and subassemblies of closing machine Gopak,

Production Engineering, red. Borkowski S., Ulewicz R., wyd. Novosibirsk State Technical

University, Novosibirsk 2009, p. 111

Responses:

Selejdak J., Konstanciak M. Praktyczne wykorzystanie instrumentów jakości w procesie

wytwarzania szyn. Hutnik – wiadomości hutnicze. T.79 nr 12, p.952-955


Knop K., Jagusiak M., Stasiak-Betlejewska R. 2009. Chapter 12. The Application of ABC

and FMEA Method to Define Critical Parts and Subassemblies of Closing Machine Gopak.

[In:] Production Engineering. Ed. and Scientific Elaboration Borkowski S., Ulewicz R.

Publisher Novosibirsk State Tech. Univ. Novosibirsk.

Responses (1):

Konstanciak M., Jagusiak-Kocik M. Chapter 5. Importance of the Machine Up-to-Dateness in

the Printing Services. [In:] Quality Control as Process Improvement Factor. Monography.

Editing and Scientific Elaboration Stanisław Borkowski, Manuela Konstanciak.

Ofic.Wydaw.Stowarzyszenia Menedżerów Jakości i Produkcji (SMJiP) Częstochowa 2012, p.

68-83. 978-83-934225-3-1

Responses (2):

Konstanciak M., Jagusiak M., Chapter 4. Analysis of Quality of the Steel Construction on the

Example of the Glass Rack. [In:] Determinants of Product Quality. Monography. Editing and

Scientific Elaboration Stanisław Borkowski, Manuela Konstanciak. Wyd. Liga-Press, Lviv

2011. p. 50-65. 978-966-397-150-3.

Responses (3):

Konstanciak M. Analiza niezgodności konstrukcji stalowych na przykładzie barierki. [In:]

Wybrane zagadnienia produkcji i zarządzania w przedsiębiorstwie. Pr. zbior. pod red. Jerzego

Siwki. Wyd.WIPMiFS PCzęst. Częstochowa 2011. p. 66-76. ISBN 978-83-87745-39-4

Responses (4):

Konstanciak M., Jagusiak M. Chapter 6. Quality analysis of steel constructions on the

example of steel guard-rail. W:Toyotarity. Knowledge using in production management. Ed.

and Scientific Elaboration Stanisław Borkowski, Marcin Nabiałek. Publisher Yurii V.

Makovetsky, Dnipropetrovsk 2010, p. 89 – 104 ISBN 978-966-1507-41-7

Responses (5):

Konstanciak M., Borkowski S., Chapter 6. Analysis of incompatibilities of the plastic

products on the example of car doorsill cover. W: Toyotarity. Standardization in enterprises.

Ed. and Scientific Elaboration Borkowski S., Konstanciak M. Publisher Yurii V. Makovetsky,

Dnipropetrovsk 2010, p. 87- 102, ISBN 978-966-1507-43-1


Borkowski S., Stasiak-Betlejewska R. 2011. Value Analysis in the Insurance Services

Concerning the Construction Investment. Chapter 6. W: Service Processes Improvement.

Monography. Editing and Scientific Elaboration Borkowski S., Jelacić D., Stasiak-

Betlejewska R. Publisher Damir Jelacić. Zagreb.

Responses:

Borkowski S., Knop K., Sitek E. 2013. Heijunka in a clothing company as area of Value

Engeenering. Chapter 6. W: Improvement's Factors in Enterprises/Products Development.

Monography. Editing and Scientific Elaboration Stanisław Borkowski, Piotr Sygut. Faculty of

Logistics, University of Maribor, Celje. s. 42-53. ISBN: 978-961-6562-73-7.


Knop K., Stasiak- Betlejewska R. 2009. Quality problems in the process of labeling glass

packages. Chapter 5. W: Evaluation of Production Processes. Ed. and Scientific Elaboration

Borkowski S., Novak A. Novosibirsk State Tech Univ. Novosibirsk. p. 51-60.

Responses (1):

Borkowski S., Knop K. 2010. Analysis of Quality Problems in Production Concerning

Tomato Concentrate. Chapter 3. W:Toyotarity. Standardization in Enterprises. Monography.

Ed. and Scientific Elaboration Stanisław Borkowski, Manuela Konstanciak. Wyd.Yurii V.

Makovetsky. Dnipropetrovsk. s. 43-58. ISBN: 978-966-1507-43-1.

Responses (2):

Knop K., Selejdak J. 2010. Implementation of FMEA Method to Improvement of Quality Food

Product. Chapter 12. W: Quality and Processes Improvement. Ed. and Scientific Elaboration

Borkowski S., Czaja P. Wyd. Endi Miletić. Sisak. s. 131-142. ISBN: 978-953-56242-2-6.


BORKOWSKI, Stanisław; STASIAK-BETLEJEWSKA, Renata; NÁPRSTKOVÁ, Nataša.

The Kaizen philosophy in the aluminium products improvement. Manufacturing Technology,

2011, Vol. 11, No 11, December, s. 2-5. ISSN 1213‐2489

Responses (1):

Borkowski S., Knop K., Szklarzyk P. 2014. Using a CTQ tree and a QFD matrix for

identification the areas needing improvement in the product – farm truck trailer. 5th

International Conference ICTKI 2014. New Technology Knowledge and Information 2014.

Litoměřice, 29. – 30. 1. 2014. Česká republika. Litoměřice. Czech Republic. PAPERS

PROCEEDINGS. ISBN: 978–80–7414–679-4, str. 21.


Stasiak-Betlejewska R., Mielczarek K., Obońska E.: Analysis of Production Process Factors

in the Food Articles Production. Chapter 4. In: Toyotarity. Realization of Production/Services

Processes. Ed.and Scientific Elaboration Borkowski S., Selejdak J. Publisher Yurii V.

Makovetsky. Dnipropetrovsk 2011, s. 43-52.

Responses (1):

BORKOWSKI S., SZKLARZYK P., KNOP K. 2013. Evaluation of superiors with the use of

12th golden rules of Toyota and the BOST research in a company from machinery branch.

Chapter 8. W: Toyotarity. Management of Intellectual Values. Monography. Editing and

Scientific Elaboration Borkowski S., Rosak-Szyrocka J. Aeternitas Publishing House, Alba

Iulia, Romania. ISBN:978-605-5343-80-4


BORKOWSKI S., STASIAK-BETLEJEWSKA R., KNOP K. 2013. Superior leadership

qualities in the public administration. International Scientific Conference „Young V4 Science

2013“ School of Economics and Management in Public Administration in Bratislava.

Responses (1):

BORKOWSKI S., SZKLARZYK P., KNOP K. 2013. Evaluation of superiors with the use of

12th golden rules of Toyota and the BOST research in a company from machinery branch.

Chapter 8. W: Toyotarity. Management of Intellectual Values. Monography. Editing and

Scientific Elaboration Borkowski S., Rosak-Szyrocka J. Aeternitas Publishing House, Alba

Iulia, Romania. ISBN:978-605-5343-80-4


BORKOWSKI S., STASIAK-BETLEJEWSKA R., KNOP K. 2013. Managerial styles in the

county office. II. International Scientific Conference „Young V4 Science 2013“. School of

Economics and Management in Public Administration in Bratislava.

Responses (1):

BORKOWSKI S., KNOP K., MIELCZAREK K. 2013. An analysis of directing styles in the

production enterprise from the automotive branch. Chapter 12. W: Toyotarity. Strategic

Factors Development of Companies. Monography. Editing and Scientific Elaboration

Borkowski S., Hittmar S. Ankara. ISBN: 978-606-613-078-3.


JELACIC D., STASIAK-BETLEJEWSKA R. 2010. Managers Evaluation in Production

Plants of Wooden Industry. Chapter 7. In: Points of Woodworking Industry Development.

Monography. Ed. and Scientific Elaboration Borkowski S., Jelacic D., Stasiak-Betlejewska R.

Publisher Yurii V. Makovetsky. Dnipropetrovsk.

Responses (1):

BORKOWSKI S., KNOP K., MIELCZAREK K. 2013. An analysis of directing styles in the

production enterprise from the automotive branch. Chapter 12. W: Toyotarity. Strategic

Factors Development of Companies. Monography. Editing and Scientific Elaboration

Borkowski S., Hittmar S. Ankara. ISBN: 978-606-613-078-3.


KNOP, K., STASIAK-BETLEJEWSKA, R. 2009. Quality problems in the process of

labeling glass packages, Chapter 5, In: Evaluation of Production Processes. Ed. and Scientific

Elaboration Borkowski S., Novak A., Novosibirsk State Tech Univ., Novosibirsk 2009. ISBN

978-5-7782-1169-8.

Responses (1):

Borkowski S., Knop K. 2013. The Influence of Innovation on the Nonconformities Structure

in Production of Wooden Wares = Wpływ innowacyjności na strukturę niezgodności przy

produkcji wyrobów dla budownictwa. W: Ekonomika a manažment podnikov 2013. Zbornik

vedeckych prac. Technicka univerzita vo Zvolene. Economy and Management of Companies

2013. 8. medzinarodna vedecka konferencia. Proceedings of Scientific Papers. 19th-20th

September 2013, Zvolen, Slovak Republic. s. 27-35. ISBN: 978-80-228-2565-8.

C. List of three quotations of the greatest significance for the candidate, including

a short statement of reasons

1. Stasiak-Betlejewska R., Borkowski S. (2012) Cluster as an element supporting passive

wooden building development, [in:] WOOD AND FURNITURE INDUSTRY IN TIMES OF

CHANGE-NEW TRENDS AND CHALLENGES . Book Editor(s): Rybansky R.; Novakova

R., Conference: 5th International Conference on Wood and Furniture Industry in Times of

Change - New trends and challenges (WoodEMA) Location: Trnava, SLOVAKIA Date: JUN

06-08, 2012 Sponsor(s): Univ Ss Cyril & Methodius; Univ Ss Cyril & Methodius, Rector;

Fac Mass Media Commun, Dean. Pp. 97-107.

Responses:

By: Greger, K (Greger, Kresimir); Segotic, K (Segotic, Ksenija); Grladinovic, T (Grladinovic,

Tomislav); Blcanic, K (Bicanic, Kristina); Peric, I (Peric, Ivana),

Title: CRITERIA RANKING IN ASSESSING TECHNOLOGICAL PROCESS

CAPABILITY IN FURNITURE MANUFACTURING,

Source: SUMARSKI LIST

Volume: 137

Issue: 5-6

Pages: 279-285

Published: 2013

ISSN: 0373-1332


2. Borkowski, S., Stasiak-Betlejewska, R., Analysis of Bent Furniture Production Costs

(2010) Wood Processing and Furniture Manufacturing: Present Conditions, Opportunities

and New Challenges, pp. 109-115. Vyhne

Responses:

Potkány, M.a , Hajduková, A.

a , Teplická, K.

b Target costing calculation in the woodworking

industry to support demand at a time of global recession [Ukierunkowane kosztorysowanie w

przemyśle drzewnym w celu wsparcia popytu w okresie światowej recesji]

(2012) Drewno, 187, pp. 89-104.

3. Work cited no. 6 (unabridged quotation including the IF):

Stasiak-Betlejewska, R., Borkowski, S., Contemporary Developmental Orientations in the

Production on the Example of the Furniture Branch (2007) Nove Trendy V Manazerstve

Kvality, pp. 18-22. 3 rocnik medzinarodnoho seminara pedagogov studijneho programu

Kvalita produkcie. Zbornik prednasok. Trnava

Responses:

Jelačić, D.a , Oblak, L.

b , Petrović, S.

c , Moro, M.

a , Barčić, A.P.

a , Ćošić, V.

d , Meloska, Ž.

e

Wood sector media promotion in some South-East European countries [Medijska promocija

drvnog sektora u nekim zemljama jugoistočne europe] (2012) Drvna

Industrija, 63 (3), pp. 195-203.

Short statement of reasons for listed above publications:

Publications are included in Web of Science and Scopus

Publications are related to issue analyzed in habilitation thesis focused on issues

related with production and services and its improvements ways






Candidate’s Statutory Declaration:

I hereby declare that all the information given on this form, including the specification of my

participation in achieving the outcomes, is true and correct.

I hereby confirm that the information given on this form is complete and accurate:

Name of the candidate’s employing institution:

Czestochowa University of Technology/Faculty of Management/Institute of Production

Engineering

Name and signature of the candidate’s superior:

In Częstochowa, Poland on 04.04.2016

Publications Web of Science Scopus Stasiak-Betlejewska

Documents

Transcript of Publications Web of Science Scopus Stasiak-Betlejewska