PI 10 Furnace for heat treatment of aluminium
1
PRZEDSIĘBIORSTWO TECHNIKI CIEPLNEJ Sp z o.o. PL. 44-100 Gliwice, ul. Wroclawska 24, skr. poczt. 125A www.piecoserwis.com.pl e-mail: [email protected] tel. (+48 32) 238-26-59, 230-21-37, 230-28-18, fax (+48 32) 231-48-06 PN-EN ISO 9001: 2009 PN-EN 18001:2004 PN-EN ISO 14001:2005 Certyfikat Nr PL-JBS-188/1/2011 PI-10 FURNACE FOR HEAT TREATMENT OF ALUMINUM Components of the furnace 1. Fixed hearth furnace jacket. 2. Mechanical rotational hearth. 3. Combustion duct with building recuperator and combustion throttle. 4. Insulating lining of the furnace chamber and combustion duct walled. 5. Air cooling collector and cooling installation of the ingots. 6. Foundations. 7. Platforms. Installations 1. Gas furnace and combustion air installations. 2. Cooling rolls installation. 3. Air curtains installation. 4. The hydraulic system. 5. Transportation equipment. Technical parameters • Type of the furnace: continuous fur- nace with mechanical hearth • Type of the charge: aluminum ingots: - Ø 203 and 178; - length of the ingot: l=7000 • Type of heat treatment: - homogenizing annealing • Power installed: - heating power 955 kW - electric power 50 kW • Bodied type of burners: ThermJet - type of fuel gas GZ 50 - gas pressure ~120mbar • Furnace efficiency 1700kg/h • Unit consumption of gas: 27 m 3 /Mg • Furnace work temperature: - up to 600°C
-
Upload
ptc-piecoserwis-sp-z-oo -
Category
Documents
-
view
216 -
download
3
description
PTC PiecoSerwis
Transcript of PI 10 Furnace for heat treatment of aluminium
PRZEDSIĘBIORSTWO TECHNIKI CIEPLNEJ
Sp z o.o. PL. 44-100 Gliwice, ul. Wrocławska 24, skr. poczt. 125A
www.piecoserwis.com.pl e-mail: [email protected] tel. (+48 32) 238-26-59, 230-21-37, 230-28-18, fax (+48 32) 231-48-06
PN-EN ISO 9001: 2009 PN-EN 18001:2004
PN-EN ISO 14001:2005
Certyfikat Nr PL-JBS-188/1/2011
PI-10 FURNACE FOR HEAT TREATMENT OF ALUMINUM
Components of the furnace
1. Fixed hearth furnace jacket. 2. Mechanical rotational hearth. 3. Combustion duct with building
recuperator and combustion throttle. 4. Insulating lining of the furnace
chamber and combustion duct walled. 5. Air cooling collector and cooling
installation of the ingots. 6. Foundations. 7. Platforms.
Installations
1. Gas furnace and combustion air installations.
2. Cooling rolls installation. 3. Air curtains installation. 4. The hydraulic system. 5. Transportation equipment.
Technical parameters
• Type of the furnace: continuous fur-nace with mechanical hearth
• Type of the charge: aluminum ingots: - Ø 203 and 178;
- length of the ingot: l=7000 • Type of heat treatment: - homogenizing annealing • Power installed: - heating power 955 kW - electric power 50 kW • Bodied type of burners: ThermJet - type of fuel gas GZ 50 - gas pressure ~120mbar • Furnace efficiency 1700kg/h • Unit consumption of gas: 27 m3 /Mg • Furnace work temperature: - up to 600°C
