Metal Fab Combi

7/28/2019 Metal Fab Combi

1/48

Every move counts.

Hilti. Outperform. Outlast.

Hilti solutionsfor metalfabricators


2/482


3/483

Overview

Hilti tuning for metal fabricators.When speed and efficiency count.

Always at the ready in the workshop Page 4 - 7

Are some of your tools always in need of repair? Are the right drill bits or

abrasive discs not at hand? With Hilti Fleet Management and our

comprehensive support you can be sure that all the Hilti products you

need are always available for use in the workshop.

Simply more flexibility for light-duty applications Page 8 - 11

Youre erecting a fence or railings but theres no electric power available

or you dont have the right anchors? With Hilti cordless tools and

injectable adhesive mortars, the right solution is always quickly at hand.

Save time with repetitive work Page 12 - 15

Would you like to make repetitive fastening jobs go 50% faster?

No problem when you avoid rebar hits and use the Hilti

HUS screw anchor system.

Always on the safe side Page 16 - 19

Do you loose sleep over particularly difficult jobs? Hilti has the right

fastening solution for every application and also supplies the tools

that let you work more safely.

Gratings fastened in seconds Page 21

How many persons does it take to fasten a grating? Hilti offers

three extremely quick one-man solutions.

The Hilti catalog for metal fabricators Page 23 - 47

All tools, accessories, consumables and ordering information for

the workshop or on site.

On the following pages youll find an overview of all Hilti products for these

areas of application relevant to the metal fabrication trade, from measuring

and alignment to cutting and grinding as well as drilling and fastening.

More information can be found online at www.hilti.com/metal_fabricators

In motor sports its often said that the

race is won or lost at the pit stops.

Perfect interplay between the team

and its equipment is thus essential if a

Formula 1 car is to be back on the

track within a few seconds.

The same applies to metal fabricators

on site and in the workshop. Thats why

Hilti offers a range of perfectly matched

high-performance tools, accessories and

unique services that meet all of your

needs. Team up with Hilti now and start

working with pit-stop efficiency.


4/484

Were there when you need us.In person, online, by phone or at a Hilti Center.

Tip for metal fabricators

Hilti Online

At Hilti Online weve set up a web por-

tal specially for metal fabricators. Here

youll find everything that Hilti offers for

the workshop and on-site installation

jobs as well as comprehensive techni-

cal information, with round-the-clock

access to our online shop.

Simply register as a customer and you

can then order Hilti products at your

special terms and conditions a

mouse click is all it takes.

www.hilti.com/metal_fabricators

Pit-stop crews have to be able to rely

one hundred percent on their tools

and equipment if top performance is

to be achieved. This also means that

every item needed has to be quickly at

hand. A winning team, after all, simply

cant afford to make compromises.

But even the best tools may need servicing or repairs and consumables can run out

at the most untimely moment. Thats when the right services are decisive. Hiltis vari-

ous sales and service channels help to accelerate the necessary processes and avoid

idle time in the workshop or on site. And our service packages provide flexible solu-

tions tailored precisely to your requirements Fleet Management and Lifetime Service

are prime examples. No matter whether you choose to leave tool management up to

us or you prefer to own your equipment, you can rest assured that your Hilti tools will

be ready for use at all times with costs under complete control.

We bring our services to you

In the workshop or on site, your Hilti representative is at your service all times, bring-

ing the know-how and experience that will help you find the right Hilti product for your

needs.

Customer Service takes your orders

Hilti Customer Service can be reached by phone, free of charge, the whole working

day long. Our experienced staff provide competent advice and take your orders.

Delivery is generally the following day and an even faster delivery service is available

on request. Our Customer Service staff also make arrangements for the free-of-

charge pick up of defective tools to be returned for repair. Replacement tools are

made available on loan for the duration of the repair to customers who have conclud-

ed the appropriate service agreement.

The Hilti Center just round the corner

Its never far to your local Hilti Center. There youll find a whole range of tools and

consumables that you can purchase on the spot and take with you. Our specialists at

the Hilti Centers will be pleased to give you tips for the kinds of work that you dont

tackle every day and also check whether your Hilti tools are in need of servicing.


5/48

In Formula 1 racing, changing tires

takes an average of only 2.9 seconds.

One of the things that make this possi-

ble is perfect logistics. Between 3,000and 4,000 tires are delivered to the pits

for just one race weekend. On top of

this, a further 20 tons of equipment

in about 8 truck loads is needed by

each team.

5

The best equipment atyour disposal


6/486

No compromises in the workshop.

In the workshop, metal fabricators

work just like a pit-stop crew. The

quality of their work and the time

taken are crucial factors. In the

preparatory phase, everything has to

be done perfectly. Thats why metal

fabricators rely on Hilti quality in the

workshop too.

Just like Hiltis renowned rotary hammers

for on-site work, Hilti electric drills and

angle grinders also let you work more

cost-efficiently in the workshop and for

longer. These tools achieve higher per-

formance because theyre developed

together with our abrasive discs and

HSS drill bits to ensure a perfect match.

The complete range of Hilti cutting discs,

grinding discs and abrasive flap discs is

available in all sizes and grades. Our

standard and premium abrasive discs

offer consistent, high quality in all gradesand diameters while extra-long life and

fast drilling performance are the hall-

marks of Hilti HSS drill bits.

It pays to insist on Hilti consumables

not just because they provide the opti-

mum price-to-performance ratio, but

because Hilti quality knows no compro-

mises.


7/487

Hilti solutions for theworkshop

Cutting, rough grinding and finishing

DAG 115-S, DAG 125, DEG 125, DEG 150 angle

grinders

There are Hilti angle grinders for all of your require-

ments, featuring top ergonomics and Hilti Smart

Power for constant cutting and grinding speed.

DAG 230-D angle grinder

The 2200 watt powerhouse for tough cutting and

grinding jobs on metal, featuring a quick-stop disc

brake for added safety and AVR for lower vibration.

AC-D cutting discs, AG-D grinding discs

A range of top-value, long-life discs in 115 -230 mm

diameters and various thicknesses and grades.

AF-D abrasive flap discs

For a high rate of removal, good surface finish and

extra-long life in jobs such as rust removal, debur-

ring and weld finishing.

Drilling in metal

SF 22-A cordless drill / driver

The handiest, most compact class-leading cordless

tool that drills faster and longer with unrivalled 22V

power and Li-ion battery capacity..

UD 30 drill

Extremely quick and rugged, with a top speed of

3,300 rpm in 2nd gear ideal for drilling in steel and

other metals.

HSS twist drills

Hilti smooth-shank twist drills deliver what they

promise in the fast-drilling, top-value standard ver-

sion or the heat-resistant cobalt version for hard

materials.

Details of tools and consumables, other products and ordering information can

be found in the Hilti catalog for metal fabricators or online at

www.hilti.com/metal_fabricators.

Hilti services for metal fabricators

Nothing is more troublesome than sudden equipment failure.

With Hilti Fleet Management, however, you always have fully

working tools at hand with costs under complete control. A

fixed monthly charge covers all tool, service and repair costs.

The monthly charge for a top-grade angle grinder, for exam-

ple, is no more than the price of a cinema ticket.

All tools are replaced at regular intervals with tools of the latestgeneration in order to ensure that they always comply with the

latest safety standards and to avoid costly idle time.

Please ask your Hilti representative for further information.


8/488

With this complete range of cordless

tools and accessories for maximum

mobility in the workshop and on site

tools that take even the toughest jobs

in the metal fabrication trade in their

stride Hilti has taken lithium-ion bat-

tery technology into a new dimension.

Hilti Lithium CPC undeniably repre-

sents a breakthrough in battery tech-

nology and cordless tool power.

One charger for all tools

The Hilti range of cordless tools for metal fabricators covers all applications from

screwdriving and drilling in metal to setting HUS screw anchors.

Kick the cord!Cordless tools for metal fabricators.

Tip for metal fabricators:

Hilti Cordless Power Care

The voltage at each cell is controlled

separately to avoid overcharging,

overheating and deep discharge

Ready for use without delay very

fast first charge up to 75%

Half the weight of NiCd/NiMh bat-

teries of the same capacity

No self-discharge charged batter-

ies can be stored, ready for use at

any time

Work for longer with each charge

up to 100% higher capacity than

NiCd/NiMh batteries of the same

weight

Longer life expectancy

Charge state / warning LEDs

Unique Hilti Lifetime Service also for batteries and chargers

Metal fabricators who purchase a Hilti tool enjoy all the benefits of Hilti LifetimeService the unique service that covers all batteries, tools and chargers in the Hilti

CPC system. Hilti provides exceptional service and a manufacturers warranty for the

entire life of the product. And its even completely free of charge for up to the first two

years from the date of purchase. After that, Hilti continues to prove the quality of its

products by setting a repair cost limit. This means that you benefit from total reliability

with costs under complete control.

Forget the hassle of power cords, because Hilti Lithium CPC (Cordless Power Care)

brings even higher battery capacity, performance and impressively long battery life to

cordless tools with all the benefits of complete mobility in the workshop and on site.

14 V

SID 144-A

SIW 144-A

SF 144-A

SFH 144-A

22 V

SF 22-ASIW 22T-A

WSR 22-A

36 V

TE 6-A

36 V

TE 7-A


9/48


10/4810

Ready for anything.

Mechanics in motor racing are accus-

tomed to having to find the right solu-

tion quickly. Faced with the sudden

onset of rain, engine failure or elec-

tronics problems, theyre able to react

quickly and flexibly to unexpected sit-

uations as you can too when you

team up with Hilti.

Deviations from building plans, different

base materials, parts positioned close to

edges or other unforeseen problems

such as contact with rebars these are

some of the challenges often faced when

making fastenings during installation

work.

By providing versatile fastening solutions

such as Hilti HIT-MM PLUS universal

injectable adhesive mortar, Hilti makes

sure that you always have a reliable and

extremely cost-efficient anchor fastening

solution at hand for use on all materials.

With Hiltis broad range of powerful cord-

less tools for drilling and setting anchors

youre no longer reliant on electric power

outlets and in a position to enjoy all the

benefits of greater mobility without loss

of performance.


11/4811

Hilti solutions for light-duty installation

Measuring, detecting

PD4 laser range meter

An extremely rugged, handy tool for easy measure-

ment of distances between 0.2 and 70 m.

PS 30 Ferrodetector

Lets you drill safely without fear of hitting rebars.

Detects and locates rebars as well as copper and

aluminium pipes in concrete and masonry at the

touch of a button.

Metalworking

SFH 144-A cordless drill / driver

The Li-ion powerhouse with the best performance-

to-weight ratio in the 14 V class ideal for all kinds

of installation work.

HSS twist drills

A broad range of smooth-shank twist drills for met-

als, available in the diameters 1 13 mm and work-

ing lengths up to 101 mm.

DAG 125-S angle grinder

Slim, robust and easily maneuverable the angle

grinder that takes a host of metalworking jobs in its

stride.

AC-D cutting discs

Ideal of installation work and good value for money,

AC-D cutting discs are available in 1 - 2.5 mm thick-

nesses.

Fastening

HRD framing anchor

With this plastic anchor you actually feel the differ-

ence in fastening quality in materials of virtually all

kinds.

HLC sleeve anchor

The good-value alternative for permanent or remov-

able fastenings, available in different versions with

various head forms. Suitable for presetting or

through-fastening techniques in all solid materials.

HUS-H 6 screw anchor system and SIW 144-A

cordless impact wrench

Drill, drive job done! This secure anchor with a

neat, attractive head can be driven in concrete

quickly with the SIW 144-A.

Hilti HIT-MM PLUS injectable adhesive mortar

The reliable, top-value solution for masonry and con-

crete. Quick and easy to use with anchor rods,

threaded rods and internally-threaded anchors. Mesh

sleeves are available for use in hollow materials.

Drilling in mineral materials

TE 6-A Li cordless rotary hammer

Extremely light in weight for a 36 V tool, the powerful

TE 6-A Li can be equipped with various chucks for

drilling in concrete, masonry and stone in diameters

up to 20 mm and in metals in diameters up to 13 mm.

TE-C hammer drill bits

The top-value alternative for fast drilling in concrete,

masonry and stone.

TE-C3X hammer drill bits

For even faster drilling and up to 30% longer life,

especially in heavily reinforced concrete.

Insulating, filling

CF 750-I insulating foam

The high-yield insulating and filling foam for use with

the CF-DS 1 d ispenser. Allows frequent pauses to be

made during application.




Hilti services for metal fabricators

Its important to us that youre able to continue working

even under unforeseen circumstances. Within the scope of

Hilti Fleet Management, you receive a replacement tool onloan in the event of need for repairs. You can also rent addi-

tional tools to cover peak periods.


12/4812

Drilling inadvertently into rebars or

pipes can lead to big delays and the

need for costly repairs. But Hilti now

offers a simple and reliable solution to

this problem in the form of the PS 30

and PS 35 Ferrodetectors tools that

locate objects in concrete or masonry

before you start drilling. Delays and

high costs can thus be avoided, espe-

cially in jobs where a large number of

holes have to be drilled.

Rebars and metal pipes are two of the

hidden perils that metal fabricators face

in installation work. Experience shows

that unexpected contact is made with a

hidden object in almost every fifth hole

drilled in concrete. But rebar hits can

now be avoided, saving time and money,

simply by taking a quick look beneath

the surface of the concrete beforehand.

Or, even better, metal fabricators can

now take the position of metal objects

that could be troublesome when drilling

into account right at the fastening design

stage.

How do you find it?

Hilti has developed two detectors that

make scanning concrete or masonry very

quick and easy. When these tools are

moved across the surface of the

object to be checked, the areas

where drilling can take place safe-

ly are indicated automatically by asimple, clear display. The PS 30

Ferrodetector shows the position of

rebars as well as copper and aluminium

pipes while the PS 35 is also capable of

measuring the thickness of concrete

cover over rebars up to a depth of 120

mm. This makes it possible to determine

exactly whether anchors can be posi-

tioned directly over rebars or metal

pipes.

With these ruggedly built, easy-to-use

detectors, metal fabricators have no

trouble in finding all metal objects that

could present an obstacle to drilling.

The intelligent way to avoid rebars.No time lost in repetitive drilling jobs.


The right way to drill

What do you do when theres no alter-

native but to drill through a rebar? Hilti

rotary hammers such as the TE 6-A

equipped with Hilti TE C3X hammer drill

bits with a solid carbide head can do

this relatively easily. The drilling opera-

tion, however, takes correspondingly

longer and is permissible only where it

has no influence on the statics of the

structure. When drilling into rebars its

important to ensure that no additional

pressure is applied the rotary hammer

should simply be guided. The hammer-

ing mechanism then maintains its full

impact energy and the drill bit doesnt

overheat excessively. This helps reduce

wear and tear and thus cut costs.

TE-C3X hammer drill bits take rebar hits in

their stride.

The DD EC-1 coring system for repetitive

drilling in heavily reinforced concrete.

It pays to take a quick look beneath thesurface with the PS 35 Ferrodetector.


13/4813

Record times again andagain

Michael Schumacher holds the most

records in Formula 1 racing: He won 7

World Championship titles, 91 Grand

Prix races, started 68 times from the

pole position and set the fastest lap

time on 76 occasions.

The record for the fastest ever speed

reached in Formula 1 racing, however,

is held by the otherwise unknown

Brazilian Antonio Pizzonia who

reached a speed of 369.9 km/h driving

a Williams at Monza in 2004.


14/4814

Top performance, time after time.

Every move counts not only in motor

racing, but also when it comes to

repetitive operations in installation

work. Theres simply no room for mis-

takes when pit stop crews change

tires. Equally so, metal fabricators

cant afford to slip up when installing

and fastening railings, canopies, hand

rails or brackets and supports for add-

ons.

The right choice of fastening solution is a

decisive factor. But no matter whether on

masonry, cracked or uncracked con-

crete, Hilti has a reliable time-saving fas-

tening solution consisting of the appro-

priate anchors, right tools and other aids

that will meet all of your requirements.

The Hilti system based on the HUS

screw anchor, for instance, makes time

savings of up to 50% possible compared

to repetitive fastening operations usingconventional stud anchors. You can ben-

efit from higher productivity by making

use of a coordinated system of tools and

components. The Hilti Ferrodetector

makes it possible to drill quickly and

repetitively with TE-C3X drill bits without

fear of hitting rebars while the power and

battery capacity of the SIW 22T-A lets

you drive the HUS anchor quickly, easily

and neatly.


15/4815

Hilti solutionsfor installation work

Measuring, detecting, aligning

PD 4 laser range meter

For quick and efficient measurement of distances up

to 70 m by a single person.

PS 35 Ferrodetector

Avoids delays due to drilling into rebars and damage

to copper or aluminium pipes.

PMC 46 combilaser

For quick vertical and horizontal alignment indoors,

with all the accessories necessary for efficient one-

man operation.

PR 25 rotating laser

For quick alignment in the vertical, horizontal and

inclined planes, indoors and outdoors. With remote

control for easy adjustment of the laser beam.

Drilling, screwdriving, metalworking


Low weight, top performance and battery capacity

for repetitive screw fastening applications and high-

speed drilling in metal.

HSS twist drills

Fast-drilling, heat-resistant cobalt twist drills for

extra-long life.


Featuring Hilti Smart PowerTM technology for con-

stant cutting or grinding performance regardless of

the pressure applied.

AC-D cutting discs, AG-D grinding discs

Technically advanced abrasive discs with outstand-ing cutting and grinding characteristics combined

with long life.

Fastening

HSA and HST stud anchors

Reliable and well proven millions of times over.

Secure and easy to install, with ETA approval.

HST for cracked and uncracked concrete, HSA for

uncracked concrete and shallower depths of

embedment.

HUS screw anchor system and SIW 22T-A

tangential impact wrench

Up to 50% faster installation in repetitive fastening

applications compared to conventional stud anchor

systems. Approved for use in concrete. Good

appearance thanks to neat head.

Hilti HIT-MM PLUS injectable mortar and

MD 2500 dispenser

The inexpensive universal solution for fastenings in

the majority of mineral materials.

Hilti HIT-HY 70 and Hilti HIT-HY 150-MAX

Drill clean inject fasten: The convenient

approved solution for highest load values (HIT-HY 70

for uncracked concrete and masonry, HIT-HY 150-

MAX for concrete).





TE 6-A Li cordless rotary hammer

Full 36 V Li-ion battery power from the first to the

last hole (up to 20 mm dia.). Effortless overhead

drilling thanks to low weight.


In multipacks at an attractive price. For fast d rilling,

even through rebars, and up to 30% longer life.

Hilti Service for metal fabricators

Tips and tricks for professionals from professionals in a

Hilti training course for metal fabricators. You and your

team will learn all about choosing the right anchor, abouthow anchors function and about installation of different

anchor systems in various materials in compliance with

approval requirements.


16/4816

Secure fastening at a glance.Hilti anchor solutions for all materials.


Hilti PROFIS Anchor

Select and design anchor fastenings with Hilti

PROFIS Anchor the quick and easy-to-use

PC application that makes all the

calculations required for secure andreliable anchor fastenings.

Download it now from


HUS-H and HUS-R screw anchors

Electrogalvanized or stainless steel

For concrete and masonry, indoors or

outdoors

ETA approval for use in cracked and

uncracked concrete

Time-saving installation through

in-place parts, 3 depths of embedment

Neat hex. head for good appearance

HRD frame anchor

Plastic anchor for use in all mineral

materials

For light-duty fastening applications

indoors and outdoors

Easy through-fastening

Various head types and lengthsavailable

HLC sleeve anchor

For temporary and permanent

fastenings in concrete, solid brick,

sand-lime block and concrete block

Suitable for low to medium loads

Easy through-fastening

Various head types available

HST stud anchor

For cracked and uncracked concrete,

hard natural stone, in various corrosion

resistance classes for indoor and out-

door use

ETA approval for use in cracked and

uncracked concrete

Easy to install using the Hilti setting

tool

In M8 to M24 sizes and various lengths

HSA stud anchor

For uncracked concrete, in various

corrosion resistance classes for indoor

and outdoor use

ETA approval for use in uncracked

concrete Easy to install using the Hilti setting

tool, 2 depths of embedment

In M8 to M24 sizes and various lengths

Hilti HIT-HY 150 MAX injectable mortar

Approved for use with HIT-V and

HIT-TZ anchor rods and HIS threaded

sleeves in cracked and uncracked

concrete

Various depths of embedment possiblewith HIT-V anchor rods

Takes up very high loads without

expansion forces

Hilti HIT-HY 70 injectable mortar

Approved for use in uncracked con-

crete, hollow and solid brick and cellu-

lar concrete Takes up very high loads without

expansion forces

Mesh sleeves for flexible depths of

embedment in hollow block masonry

Hilti HIT-MM PLUS injectable mortar

The universal solution for light-duty

fastenings in concrete and masonry

Mechanical anchors Chemical anchors


17/4817

Winners put safety first

Serious accidents in the 90s revolution-

ized safety in motor racing. A Formula

1 car now has to pass 15 loading tests,

in which the monocoque must remain

completely intact, before receiving

approval. Elastic, shock-absorbing sys-

tems provide additional protection for

the drivers head, neck and areas inside

the cockpit. The sides of the drivers

compartment are now reinforced with a

material used in the manufacture of

bulletproof vests, which prevents for-

eign objects penetrating the cockpit.


18/4818

Always on the safe side.

In motor racing, great efforts have

been made in recent years to make

the cars and the race tracks safer. We

are also convinced that only a safe

jobsite can be a truly productive job-

site. Accordingly, Hilti has been very

successful in its endeavors to achieve

greater safety in every aspect.

Especially where heavy applications are

concerned, metal fabricators can count

on the features incorporated in Hilti tools

for the protection of the user as well as

the high levels of safety offered by Hilti

fastening solutions.

Accidents in the workshop or on site not

only present a risk of injury, they also

delay completion of the job. Hilti there-

fore concentrates on making its tools,

and thus the applications for which they

are used, as safe as possible. Unique

innovations in this field, such as ActiveVibration Reduction (AVR), have therefore

already become standard in Hilti combi-

hammers and breakers.

The Active Torque Control (ATC) system

incorporated in Hilti angle grinders stops

the tool in a fraction of a second in

potentially risky situations where the disc

could stick and stall. Non-slip grip areas

and soft-grip side handles also help to

provide a secure hold and further reduce

vibration. Further examples of the contri-

bution we make to your safety, and thus

to higher productivity, can be found at

www.hilti.com/safety. Please ask your

Hilti representative or at your nearest Hilti

Center for more information about spe-

cial Hilti safety training courses.


19/4819

Heavy-duty fasteningwith Hilti

Measuring, detecting, aligning

PD 42 laser range meter

With built-in optical sight ideal for outdoor use.

PMC 46 combilaser

For quick alignment work indoors and tasks such as

transferring measurement marks to ceilings.

PR 25 rotating laser

Ideal for indoor and outdoor alignment work, fea-

tures Auto Alignment SystemTM laser control.

PS 35 Ferrodetector

Measures the depth of concrete cover over rebars or

detects and locates rebars and copper or aluminium

pipes to allow drilling in concrete or masonry to be

carried out quickly and safely..

Drilling, screwdriving, metalworking


22 V power in a compact, convenient ergonomic

design for easy, reliable screwdriving even in tight

corners.

HSS twist drills

High-performance, long-life cobalt twist drills in

4 practical sets for installation work.


Features ATC for safer cutting and grinding: the tool

stops as soon as the disc begins to stick.

AC-D cutting discs

Glass-fiber reinforced for high resistance to breakage.


TE 30-C-AVR rotary hammer

The all-rounder with AVR. Ideal for installation work

including drilling anchor holes up to 28 mm and light

chiseling.

TE-7-A Li cordless rotary hammer

With the performance and staying power of a top

corded tool, for drilling in steel, masonry and con-

crete up to max. 24 mm dia. and in metal up to 13

mm dia. Can be fitted with a self-contained dust

removal attachment (no cord or hose) for virtually

dustless drilling.


Featuring the gradient technology for better shock

absorption at the head when drilling into rebars in

concrete: longer life, safer drilling, higher working

comfort and better wear resistance.

Fastening

HST stud anchor

Approved for use in cracked and uncracked concrete,

takes up high loads thanks to special segments that

ensure reliable follow-up expansion.

HUS screw anchor system and SIW 22T-A

cordless impact wrench

The perfectly coordinated screw anchor system for

quick, secure through-fastening with high load

values even when set close to edges and closely

spaced.

Hilti HIT-HY 70 injectable mortar

Secure and approved for fastenings in uncracked

concrete and masonry, various depths of embed-

ment possible with extendible mesh sleeves.

Hilti HIT-HY 150-MAX injectable mortar with HIT-V

anchor rodsFor a secure hold with highest load values the

approved fastening system for use in cracked and

uncracked concrete.




Hilti Service for metal fabricators

HIT-V anchor rods with

Hilti HIT-HY 150-MAX

the approved fasteningsystem that keeps you

on the safe side despite

cost savings thanks to

variable setting depths.

kgkgkg


20/48

A Formula 1 car accelerates from 0

100 km/h in 2.5 seconds and, on the

other hand, takes only 1.9 seconds to

come to a standstill from 200 km/h

under full braking power. This causesthe drivers body to be pressed into his

safety harness with a force equal to 5

times his own body weight and the

brake discs reach a temperature of

800C within one second.

20


21/4821

Grating and checkerplate fastening systems

A choice of two solutions with the Hilti direct fastening system: the DX 460-GR

or the DX 76 PTR with GR equipment for use indoors and outdoors (slightly cor-

rosive environments)

Direct fastening in seconds.Quick, easy and secure no power cords, no welding.

X-FCM-M removable grating disc and

X-CR M8 threaded stud

Robust and reliable: The high-grade,

vibration-resistant grating fastening

Efficient: Threaded studs are driven

into the steel supports with a DX tool

and grating fastening discs then

screwed on and tightened using a

cordless screwdriver such as the Hilti

SF 144-A

X-GR RU removable grating fastener

Quick: The preassembled fastener rais-

es productivity, making up to 240 fas-

tenings per hour possible with the

DX 460-GR fastening tool

Convenient: The grating height is

shown on the fastener

Secure: Two supporting arms ensure

90 fastening with high resistance to

vibration

The X-MGR manual fastener for use in

slightly corrosive environments

Convenient: Even narrow-mesh

gratings can be fastened from above

by a single person

Efficient: Up to 180 fastenings per

hour can be made from the top side of

the grating using a cordless screwdriv-

er such as the Hilti SF 144-A

Versatile: Suitable for various grating

heights, can be removed and reused




Higher speed on profile metal sheets

The DX 76-PTR powder-actuated fastening tool and the X-ENP nail are key elements

of the highly efficient and approved Hilti system for fastening profile metal sheets on

steel supports. Hilti can also take you comfortably up to maximum screwdriving

speed with collated self-drilling screws for overlap joints and special screwdrivers for

the metal fabrication trade including the SDT 30 the innovative stand-up screwdriv-

ing tool that makes fastening roofing sheets quicker and more convenient than ever.

Ask your Hilti representative for further information or call Customer Service on 0000-

000 00 00.


22/4822

Great services thechoice is yours

Outstanding services for a

product lifetime.

The unique service package for those

who prefer to own their tools.

Hilti tools are built to last. But even if a defect occurs, Hilti will take care of

it. Quickly and professionally, for up to 2 years completely free of charge.

After that we continue to prove the quality of our products by putting a limit

on what a repair can cost for as long as you continue using your Hilti tool.

We even give you a lifetime manufacturers warranty against manufacturing

defects. Thats not just reassuring to know, its unique in this field.

We manage your tools.

So you can manage your business.

With Hilti Fleet Management, a fixed monthly charge covers all tool, service

and repair costs. That greatly simplifies your financial planning and takes a

load of administrative work off your shoulders. There are no hidden costs.

All tools in the fleet are replaced at regular intervals with tools of the latest

generation, thus helping to avoid costly downtime and ensuring compli-

ance with the latest safety standards.

NOCOSTS

MANUFACTURERS

WARRANTYREPAIRCOST LIMIT

LIFETIME

SERVICE

2Yearsup to

LifetimeLifetime


23/4823

The Hilti catalog formetal fabricators.


Orderinginformation


24/48

In motor sports, races are won and lost at the pit stops. Perfect interplay between

the team and its equipment is thus essential. Thats why Hilti offers metal fabricators

a range of perfectly matched high-performance tools and accessories for a wide

range of jobs in the workshop and on site, including measuring and alignment,

metalworking, drilling and fastening on mineral materials all in record time.

Measuring, aligning and detecting Page 25

Cutting, rough grinding and finishing Page 26

Drilling and screwdriving in metal Page 29

Drilling in mineral materials Page 33

Fastening on mineral materials Pages 35 - 43

Mechanical anchors

Chemical anchors

Fastening gratings Page 44

Filling and insulating Page 45

Selection of tools and anchors Page 46

24

Content

Every move counts.


25/4825

Ordering information for metal fabricators

Measuring, aligning and detecting

Measuring

Ordering designation Package contents Item no.

PD 4 laser range meter 1 202416

PD 42 laser range meter with optical sight 1 320286

Detecting


PS 30 Ferrodetector for locating steel rebars, copper and aluminium pipes 1 407920

PS 35 Ferrodetector for locating steel rebars, copper and aluminium pipes, and measuring depth of concrete cover 1 407959

Aligning


PMC 46 combilaser with universal adapter and tripod 1 411210

PR 25 rotating laser with laser receiver 1 233852PRA 70 wall mount for the PR 25 1 285314

PA 931 crank tripod for the PR 25 1 315998

Further tools and accessories for measuring, detecting and aligning are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com


26/4826


Cutting, rough grinding and finishing

Angle grinders


DAG 115-S angle grinder 1 211895

DAG 125-S angle grinder 1 382583

DEG 150-P angle grinder with lockable switch 1 285944

DAG 230-D angle grinder 1 000000

Angle grinder accessories


Quick-locking nut, flat, Kwik-Lock nut for all angle grinders 1 033685

Protective cover DAG 115-S 1 341362

Protective cover 125 341429



Goggles I-VO 805 PS clear 285780

AF-D abrasive flap discs for 22.2 mm arbor

Disc dia. (mm) Grit Ordering designation Package contents Item no.

115 40 AF-D 115U/40A resin fibre flap disc 10 047843









AC-D cutting discs for 22.2 mm arbor

Disc dia. (mm) Disc thick- Type Ordering designation Package contents Item no.ness (mm)

115 1.0 UP AC-D 115 Inox UP 25 361893

125 1.0 UP AC-D 125 Inox UP 25 361894

150 1.0 UP AC-D 150 Inox UP 25 361895

230 1.8 UP AC-D 230 Inox UP 25 361897

115 2.5 UP AC-D 115 UP 25 361875

125 2.5 UP AC-D 125 UP 25 361876150 2.5 UP AC-D 150 UP 25 361877

230 2.5 UP AC-D 230 UP 25 361879

115 1.0 USP AC-D 115 Inox USP 25 361885

125 1.0 USP AC-D 125 Inox USP 25 361887

150 1.0 USP AC-D 150 Inox USP 25 361889

230 1.8 USP AC-D 230 Inox USP 25 361892

115 2.5 USP AC-D 115 USP 25 361880

125 2.5 USP AC-D 125 USP 25 361881

150 2.5 USP AC-D 150 USP 25 361882

230 2.0 USP AC-D 230 USP 25 277251

Further cutting discs are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com


27/4827


AG-D grinding discs for 22.5 arbor

Disc dia. (mm) Disc thick- Type Ordering designation Package contents Item no.ness (mm)

115 6.4 UP AG-D 115 UP 10 361898

125 6.4 UP AG-D 125 UP 10 361899

150 6.4 UP AG-D 150 UP 10 361900

230 6.4 UP AG-D 230 UP 10 361902115 6.4 USP AG-D 115 USP 10 361903

125 6.4 USP AG-D 125 USP 10 361904

150 6.4 USP AG-D 150 USP 10 361905

230 6.4 USP AG-D 230 USP 10 361907

Further grinding discs are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

Hilti abrasive discs for uncompromising quality

UP = Universal Premium the outstanding universal abrasive discs for all metals except stainless steel

USP = Universal Super Premium High-performance abrasive discs for all metals including stainless steel

INOX = Extra-thin, long-life cutting discs for sheet metal and stainless steel


28/48

Hilti abrasive

discs for metal

fabricators

Hot discs set thepace.


Working on steel and other metals

with Hilti abrasive discs is like lead-

ing a race from start to finish. Their

aggressive cutting action, high rate

of material removal and extra-long

life boost your efficiency and speed

up all kinds of cutting, rough grinding

or finishing jobs in the workshop andon site. Try them now!


Hilti Corporation I 9494 Schaan I Liechtenstein I P +423-234 2111 I F +423-234 2965 I www.hilti.com


29/4829


Drilling and screwdriving in metal

Tool sets for metal fabricators


SF 144-A cordless drill driver + SIW 144-A cordless impact wrench, set 1 000000

With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, BBP Uni bit set and

S-NSD 1/2" - 13L socket wrench insert set

SFH 144-A cordless hammer drill driver + SIW 144-A cordless impact wrench, set 1 000000

With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, BBP Uni bit set and

S-NSD 1/2"-13L socket wrench insert set

Drills


UD 30 drill 1 211974

Cordless drill drivers and cordless hammer drill drivers


SF 144-A cordless drill driver 1 355412

With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, 6-piece HSS drill bit set

SFH 144-A cordless hammer drill driver 1 355414

With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, 6-piece HSS drill bit set

SF 22-A cordless drill driver 1 000000

With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, HSS drill bit set 1 - 10

SFH 22-A cordless hammer drill driver 1 000000

With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, HSS drill bit set 1 - 10

Cordless impact screwdrivers and wrenches


SID 144-A cordless impact screwdriver, set with two 2.6 Ah Li-ion batteries 1 272828With 1/4" hex drive, for driving the HUS screw anchor in 6 mm holes andthe countersunk-head HRD framing anchor in sizes up to 10 mm dia.

With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger and S-NSD light-duty set

SIW 144-A cordless impact wrench, set with two 2.6 Ah Li-ion batteries 1 000000

With 1/2" square drive, for driving the HUS screw anchor in 6 mm holes and

the hex-head HRD framing anchor in sizes up to 10 mm dia.

With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, S-NSD 13-15 socket wrench insert set

SIW 22T-A cordless impact wrench 1 000000

With 1/2" square drive, for driving the HUS-H and HR screw anchor in 8 14 mm sizes

With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, two S-NSD 1/2" 13, two S-NSD 1/2" 15

Battery accessories


B 144 2.6 Li-ion batteryfor SF 144-A. SFH 144-A, SID 144-A and SIW 144-A 1 273114

B 22 2.6 Li-ion batteryfor SF 22-A, SFH 22-A, SIW 22T-A 1 270838

C 4/36-ACS Li TPS charger for Li-ion batteries 1 272442

HSS twist drill sets


HSS twist drill set 2 8, diameters 2 8 mm in 1 mm increments 6 213950

HSS cobalt drill set 1 10, diameters 1 10 mm in 0.5 mm increments 19 304981

HSS cobalt drill set 1 13, diameters 1 13 mm in 0.5 mm increments 25 304982

HSS drill set 1 10, diameters 1 10 mm in 0.5 mm increments 19 304938

HSS drill set 1 13, diameters 1 13 mm in 0.5 mm increments 25 304939

HSS drill set 1 10, diameters 1 10 mm in 1 mm increments 10 405312


30/4830


HSS cobalt twist drills

Ordering designation Drill bit dia. (mm) Working length (mm) Package contents Item no.

HSS cobalt twist drill 1.0x34 1.0 34 10 304941















HSS cobalt twist drill 8.5x117 8.5 117 10 304971HSS cobalt twist drill 10.0x133 10.0 133 10 304974






Further diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

HSS standard twist drills


HSS twist drill 1.0x34 1.0 34 10 304898

HSS twist drill 2.5x57 2.5 57 10 304902HSS twist drill 3.0x61 3.0 61 10 304903

HSS twist drill 3.2x65 3.2 65 10 304904

HSS twist drill 3.5x70 3.5 70 10 304908

HSS twist drill 4.0x75 4.0 75 10 304910

HSS twist drill 4.2x75 4.2 75 10 304912

HSS twist drill 5.0x86 5.0 86 10 304916

HSS twist drill 5.2x86 5.2 86 10 304917

HSS twist drill 5.5x93 5.5 93 10 304920

HSS twist drill 5.5x125 5.5 125 10 383780

HSS twist drill 5.5x175 5.5 175 10 383781

HSS twist drill 5.7x93 5.7 93 10 304921

HSS twist drill 5.7x125 5.7 125 10 383784

HSS twist drill 5.7x175 5.7 175 10 383785

HSS twist drill 6.0x93 6.0 93 10 304923

HSS twist drill 6.5x101 6.5 101 10 304924

HSS twist drill 7.0x109 7.0 109 10 304925

HSS twist drill 8.0x117 8.0 117 10 304927

HSS twist drill 8.5x117 8.5 117 10 304928

HSS twist drill 10.0x133 10.0 133 10 304931

HSS twist drill 10.3x133 10.3 133 10 304932

HSS twist drill 11.0x142 11.0 142 10 304933

HSS twist drill 11.5x142 11.5 142 10 304934

HSS twist drill 12.0x151 12.0 151 10 304935Further diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com


31/4831


HSS stepped drill bits

Ordering designation Dia. (mm) Package contents Item no.

Stepped drill bit 6 30 6 - 30 1 287030

Stepped drill bit 4 20 4 - 20 1 304983

Stepped drill bit M10 M40 8.5 40.5 1 304984

HSS countersinking bit


Countersinking bit 90 12.4 1 283872

MetalCut bimetal hole saws


Bimetal hole saw 22 MetalCut 22 1 203994



Bimetal hole saw 40 MetalCut 40 1 204120Bimetal hole saw 51 MetalCut 51 1 206012


Further bimetal hole saws and accessories are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

Cutting oil


MC cutting oil 100 ml for drilling in metal 1 211981

Torx bits


S-BS TX bit dispenser with bit holder and Torx 10, 15, 20, 25, 30, 40 1 258698

S-B-TX 30 T screwdriver bit 10 258144

S-B-TX 40 screwdriver bit 10 258146

Further individual bits and bit sets are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

Bit holder for 1/4" bits

Ordering designation Length (mm) Package contents Item no.

S-BH-50 M bit holder 50 1 257257

Further bit holders in various lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

1/4" S-B NS socket wrench inserts with 1/4" square drive, for driving hex. head screws

Ordering designation Size AF (mm) Package contents Item no.

S-B 1/4 NS7 socket wrench insert 7 1 236342






S-B-NS17 socket wrench insert 17 1 080231

Adapters and extensions for socket wrench inserts are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com


32/4832


1/2" S-NSD socket wrench inserts with 1/2" square drive, for driving hex. head screws


S-NSD set medium duty HUS for HUS 8 and HUS 10 screw anchors 13, 15 4 408429

S-NSD set light duty HUS for HUS 6 and HUS 8 screw anchors 4084303x SNSD 1/2" 13, bit holder S-BH 28 1/2" 1/4", S-B-TX 30, S-B-TX 40

S-NSD 1/2"-8 L socket wrench insert for M5 8 1 408413

S-NSD 1/2"-10 L socket wrench insert for HLC-H8 sleeve anchor 10 1 408414

S-NSD 1/2"-12 L socket wrench insert 12 1 408415

S-NSD 1/2"-13 L socket wrench insert for HUS 6 and HUS 8 -H8 screw anchors 13 1 408416

S-NSD 1/2"-15 L socket wrench insert for HUS 10 screw anchor 15 1 408417S-NSD 1/2"-16 L socket wrench insert for M10 16 1 404418

S-NSD 1/2"-17 L socket wrench insert for HLC-H 12 sleeve anchor 17 1 404419



S-NSD 1/2"-21 L socket wrench insert for HUS 14 screw anchor 21 1 404422





Further socket wrench inserts, adapters and extensions are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

Adapters for socket wrench inserts


S-NSD 1/2 - 3/4" adapter adapts 1/2" square drive to 3/4" square drive 1 375859

S-NSD 1/2 - 3/8" adapter adapts 1/2" square drive to 3/8" square drive 1 375858

S-BH 1/2 1/4" bit holder adapts 1/2" square drive to 1/4" hex. drive 1 369096

S-NSD 3/8" x 50 adapter adapts 1/4" hex. drive to 3/8" square drive 1 236339

1/2" square drive extensions

Ordering designation Length (mm) Package contents Item no.

S-NSD 1/2 - 5" extension 125 1 385942S-NSD 30 deg universal adapter 1 386059

3/8" S-B NS socket wrench inserts with 3/8" square drive, for driving hex. head screws


S-B 3/8" NS10 socket wrench insert 10 1 236350




Adapters and extensions for socket wrench inserts are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com


33/4833



Tool sets for metal fabricators


TE 6-A cordless rotary hammer + SF 144-A cordless drill driver, set 1 360543With B36 2.4 Ah battery and two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger,

TE-C3X drill bit set M1 and SBP Uni bit set

TE 6-A cordless rotary hammer + SFH 144-A cordless hammer drill driver, set 1 360547

With B36 2.4 Ah battery and two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger,


TE 6-A cordless rotary hammer + SID 144-A cordless impact screwdriver, set 1 360551



TE 6-A cordless rotary hammer + SIW 144-A cordless wrench, set 1 000000


TE-C3X drill bit set M1 and S-NSD 1/2" -13L socket wrench insert set

Cordless rotary hammersOrdering designation Package contents Item no.

TE 6-A cordless rotary hammer 1 203598

With B36 2.4 Ah battery, C 4/36-ACS Li TPS charger, TE-C3X drill bit set M1

TE 7-A cordless rotary hammer 1 203603

With B36 3.3 Ah battery, C 4/36-ACS Li TPS charger, TE-C3X drill bit set M1

Cordless tool accessories


B36 2.6 Ah Li-ion batteryfor the TE 6-A 1 272915

B36 3.3 Ah Li-ion batteryfor the TE 7-A 1 401394

C 4/36-ACS Li TPS charger for Li-ion batteries 1 272442

TE 2-M / TE 7-A NG chuck complete SDS-plus for TE 6-A Li, TE 7-A Li 1 273118

TE 2M/7C/7A/6A keyless chuck for drill bits with smooth shanks up to 13 mm dia. 1 224119

Rotary hammers


TE 7-C rotary hammer set with TE C3X drill bit set M1 1 365652

TE 7-C DRS rotary hammer set with TE DRS-M dust removal attachment and TE-C3X drill bit set M1 1 365653

TE 30 rotary hammer set with TE-C3X drill bit set M1 1 402582

TE 30-C-AVR rotary hammer set with chiseling function and TE-C3X drill bit set M1 1 402593

TE-C3X premium drill bit setsOrdering designation Package contents Item no.

TE-C3X (6) M1 hammer drill bit set with 6 TE-C3X drill bits 5 12 mm dia. 1 206628

TE-C3X (12) L1 hammer drill bit set with 12 TE-C3X drill bits 5 10 mm dia. 1 206631

TE-C3X (12) L2 hammer drill bit set with 12 TE-C3X drill bits 5 16 mm dia. 1 206628


34/4834


TE-C3X hammer drill bits in multipacks


TE-C3X 6/17 MP6 6 100 6 206585

TE-C3X 6/17 MP12 6 100 12 306601

TE-C3X 6/17 MP24 6 100 24 206619

TE-C3X 6/22 MP6 6 150 6 206586

TE-C3X 6/22 MP12 6 150 12 206602

TE-C3X 6/22 MP24 6 150 24 206620

TE-C3X 8/17 MP6 8 100 6 206589

TE-C3X 8/17 MP12 8 100 12 206604

TE-C3X 8/17 MP24 8 100 24 206622

TE-C3X 8/22 MP6 8 150 6 206590

TE-C3X 8/22 MP12 8 150 12 206605

TE-C3X 8/22 MP24 8 150 24 206623

TE-C3X 10/17 MP6 10 100 6 206592

TE-C3X 10/17 MP12 10 100 12 206607

TE-C3X 10/17 MP24 10 100 24 206625

TE-C3X 10/22 MP6 10 150 6 206593TE-C3X 10/22 MP12 10 150 12 206608

TE-C3X 10/22 MP24 10 150 24 206626

TE-C3X 12/17 MP6 12 100 6 206612

TE-C3X 12/17 MP12 12 100 12 206610

TE-C3X 12/17 MP24 12 100 24 206577

TE-C3X 12/22 MP6 12 150 6 206613

TE-C3X 12/22 MP12 12 150 12 206611

TE-C3X 12/22 MP24 12 150 24 206578

TE-C3X 12/27 MP6 12 200 6 206614

TE-C3X 12/27 MP12 12 200 12 202870

Individual drill bits, further multipacks and other diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

TE-C hammer drill bits in multipacks


TE-C 8/17 MP6 8 100 6 383128

TE-C 8/17 MP12 8 100 12 383141

TE-C 8/22 MP6 8 150 6 383129

TE-C 8/22 MP12 8 150 12 383142

TE-C 10/17 MP6 10 100 6 383131

TE-C 10/17 MP12 10 100 12 383144

TE-C 10/22 MP6 10 150 6 383132

TE-C 10/22 MP12 10 150 12 383145

TE-C 12/17 MP6 12 100 6 383078

TE-C 12/17 MP12 12 100 12 383087

TE-C 12/22 MP6 12 150 6 383079

TE-C 12/22 MP12 12 150 12 383088

TE-C 14/22 MP12 14 150 12 383091

TE-C 14/32 MP12 14 250 12 383092

TE-C 16/22 MP12 16 150 12 383094

TE-C 16/32 MP12 16 250 12 383095

Individual drill bits, further multipacks and other diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com


35/4835


Fastening on mineral materials

Mechanical anchors: stud and segment anchors

HST stud anchor, galvanized For concrete and hard natural stone With ETA approval for use in cracked and uncracked concrete

Ordering designation Hole dia. (mm) Fixture thickness (mm) Package contents Item no.

HST M8x75/10 8 10 100 371581

HST M8x75/10 BW 8 10 100 379378

HST M8x95/30 8 30 100 295378

HST M10x90/10 10 10 50 371584

HST M10x90/10 BW 10 10 25 379379

HST M10x100/20 10 20 50 371879

HST M10x110/30 10 30 40 295387

HST M12x115/20 12 20 25 371587

HST M12x145/50 12 50 25 371588

HST M12x185/90 12 90 25 371589HST M16x140/25 16 25 12 371593

HST M16x165/50 16 50 12 371594

Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

HST-R stud anchor, A4 stainless steel For concrete and hard natural stone, indoors and outdoors With ETA approval for use in cracked and uncracked concrete


HST-R M8x75/10 8 10 50 376039

HST-R M8x95/30 8 30 50 376041

HST-R M10x90/10 10 10 50 376043

HST-R M10x110/30 10 30 40 295368

HST-R M10x130/50 10 50 25 376045

HST-R M12x115/20 12 20 25 376047

HST-R M12x145/50 12 50 25 376048

HST-R M16x140/25 16 25 12 376051

HST-R M16x165/50 16 50 12 376052

HST-R M16x215/100 16 100 12 376053


HSA segment anchor, galvanized With ETA approval for use in uncracked concrete


HSA M6x65/10/20 6 20 200 255831

HSA M6x85/30/40 6 40 100 255832

HSA M8x57/-/5 8 5 100 255834

HSA M8x75/10/23 8 23 100 255835

HSA M8x92/27/40 8 40 40 295377

HSA M8x115/50/63 8 63 50 255837

HSA M10x68/-/5 10 5 50 255839

HSA M10x90/20/25 10 25 50 255840

HSA M10x108/37/45 10 45 40 295350

HSA M12x100/5/25 12 25 25 255845

HSA M12x120/25/45 12 45 25 255846

HSA M12x150/55/75 12 75 25 255847HSA M12x180/85/105 12 105 25 255848

HSA M16x120/5/25 16 25 16 255853

HSA M16x140/25/45 16 45 16 255854

HSA M16x190/75/95 16 95 16 255855



36/4836


HSA-R segment anchor, A4 stainless steel For indoor and outdoor use With ETA approval for use in uncracked concrete


HSA-R M6x50/-5 6 5 100 332183

HSA-R M6x65/10/- 6 - 200 332184

HSA-R M6x85/30/- 6 - 100 332185HSA-R M8x75/10/23 8 23 100 332187

HSA-R M8x92/27/40 8 40 40 295370

HSA-R M10x65/-/5 10 5 50 332190

HSA-R M10x90/20/25 10 25 50 332191

HSA-R M10x120/50/57 10 57 40 295378

HSA-R M12x100/5/25 12 25 25 332194

HSA-R M12x120/25/45 12 45 25 332195

HSA-R M16x140/25/45 16 45 16 337117


Setting tools for the HST and HSA


HS-SC 150 setting tool 1 337918

M6 M12, fits TE-C (SDS-plus) chucks, 150 mm overall length

HS-SC 300 setting tool 1 337919

M6 M12, fits TE-C (SDS-plus) chucks, 300 mm overall length

HLC sleeve anchor, bolt version For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block

Ordering designation Thread Anchor length (mm) Fixture thickness (mm) Package contents Item no.

HLC 8 x 40/10 M6 40 10 100 385814

HLC 8 x 55/25 M6 55 25 100 385816

HLC 10 x 40/5 M8 40 5 50 385819HLC 10 x 50/15 M8 50 15 50 385820

HLC 10 x 60/25 M8 60 25 50 385822

HLC 10 x 100/65 M8 100 65 50 385824

HLC 12 x 55/15 M10 55 15 50 385825

HLC 12 x 75/35 M10 75 35 50 385827

HLC 12 x 100/60 M10 100 60 25 385829

HLC 16 x 60/10 M12 60 10 25 385830

HLC 16 x 100/50 M12 100 50 10 385831

HLC 16 x 140/90 M12 140 90 10 385832

HLC-H sleeve anchor with hex. head

For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block


HLC-H 8 x 40/10 M6 40 10 100 385836

HLC-H 8 x 55/25 M6 55 25 100 385838

HLC-H 8 x 70/40 M6 70 40 100 385840

HLC-H 10 x 40/5 M8 40 5 50 385841

HLC-H 10 x 60/25 M8 60 25 50 385842

HLC-H 10 x 100/65 M8 100 65 50 385847

HLC-H 12 x 55/15 M10 55 15 50 385848

HLC-H 12 x 75/35 M10 75 35 50 385849

HLC-H 12 x 100/60 M10 100 60 25 385852

HLC-H 16 x 60/10 M12 60 10 10 385853

HLC-H 16 x 100/50 M12 100 50 15 385854

HLC-H 16 x 140/90 M12 140 90 10 385855


37/4837


HLC-SK sleeve anchor, with countersunk head For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block


HLC-SK 6.5 x 45/20 M5 45 20 100 385856

HLC-SK 6.5 x 65/40 M5 65 40 100 385857

HLC-SK 8 x 60/25 M6 60 25 100 385859

HLC-SK 8 x 75/40 M6 75 40 100 385860

HLC-SK 8 x 90/55 M6 90 55 100 385861

HLC-SK 10 x 45/5 M8 45 5 50 385862

HLC-SK 10 x 85/45 M8 85 45 50 385863

HLC-SK 10 x 105/65 M8 105 65 50 385864

HLC-SK 10 x 130/95 M8 130 95 25 385865

HLC-SK 12 x 80/35 M10 80 35 50 385866

HLC-L sleeve anchor, with oval head For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block


HLC-L 10 x 50/15 M8 50 15 50 385867HLC-L 10 x 60/25 M8 60 25 50 385868

HLC-L 10 x 80/45 M8 80 45 50 385869

HLC-L 10 x 100/65 M8 100 65 50 385870

HLC sleeve anchor, in bulk package For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block


HLC 8 x 40/10 BUCKET M6 40 10 500 385815

HLC 10 x 50/15 BUCKET M8 50 15 400 385821

HLC 12 x 55/15 BUCKET M10 55 15 250 385826

HLC 12 x 75/35 BUCKET M10 75 35 200 385828

HLC-H 8 x 55/25 BUCKET M6 55 25 500 385839

HLC-H 10 x 60/25 BUCKET M8 60 25 300 385844

HLC-H 10 x 80/45 BUCKET M8 80 45 200 385846

HLC-H 12 x 75/35 BUCKET M10 75 35 150 385851

Mechanical anchors: screw anchor system

HUS-H 6 screw anchor, galvanized With hex. head and integrated washer, for use in concrete and masonry

Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.setting depth (mm)

HUS-H 6x35 6 35 34 - 100 273655

HUS-H 6x45 6 45 34 - 100 273656HUS-H 6x60 6 60 34 - 100 273659

HUS-H 6x80 6 80 34 - 100 273663

HUS-H 6x100 6 100 34 - 100 273666

HUS-H 6x120 6 120 34 - 100 273667

HUS-HR 6 screw anchor, A4 stainless steel With hex. head and integrated washer, for use in concrete and masonry, indoors and outdoors With ETA approval for use in cracked and uncracked concrete


HUS-HR 6x35/5 6 35 - 30 50 290005

HUS-HR 6x45/15 6 45 - 30 50 290011HUS-HR 6x60/5/30 6 60 55 30 50 290014

HUS-HR 6x70/15/40 6 70 55 30 50 290015


38/4838


HUS-H 8 screw anchor, galvanized With hex. head and integrated washer, for use in concrete and masonry With ETA approval for use in cracked and uncracked concrete


HUS-H 8x55/-/5 8 55 - 50 50 368728

HUS-H 8x65/5/15 8 65 - 60 50 368729

HUS-H 8x80/5/20/30 8 80 75 60 50 401438

HUS-H 8x90/15/30/40 8 90 75 60 50 368731

HUS-H 8x110/35/50/60 8 110 75 60 50 368732

HUS-H 8x130/55/70/80 8 130 75 60 50 368733

Anchors in other lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com



HUS-HR 8x55/5 8 55 - 50 25 290029

HUS-HR 8x65/5/15 8 65 - 60 25 290030

HUS-HR 8x75/15/25 8 75 - 60 25 290031

HUS-HR 8x85/5/25/35 8 85 80 60 25 290032

HUS-HR 8x95/15/35/45 8 95 80 60 20 290033

HUS-HR 8x105/25/45/55 8 105 80 60 20 290034

HUS-H 10 screw anchor, galvanized With hex. head and integrated washer, for use in concrete and masonry With ETA approval for use in cracked and uncracked concrete


HUS-H 10x65/-/5 10 65 - 60 50 368735

HUS-H 10x75/5/15 10 75 - 70 50 368736HUS-H 10x90/5/20/30 10 90 85 70 50 401439

HUS-H 10x100/15/30/40 10 100 85 70 50 368738

HUS-H 10x120/35/50/60 10 120 85 70 50 368739

HUS-H 10x140/55/70/80 10 140 85 70 50 368740

Anchors in other lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com



HUS-HR 10x65/15 10 65 - 60 25 290062HUS-HR 10x75/5/15 10 75 - 70 25 290063

HUS-HR 10x85/15/25 10 85 - 70 25 290067

HUS-HR 10x95/5/25/35 10 95 90 70 25 290068

HUS-HR 10x105/15/35/45 10 105 90 70 25 290072

HUS-HR 10x115/25/45/55 10 115 90 70 25 290131

HUS-HR 10x130/40/60/70 10 130 90 70 25 290161


Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.

setting depth (mm)

HUS-HR 14x80/10 14 80 - 70 12 290181

HUS-HR 14x120/10/50 14 120 110 70 12 290182

HUS-HR 14x135/25/65 14 135 110 70 12 290183


39/4839


Cordless impact wrench for driving the HUS-H/-HR screw anchor


SIW 22T-A cordless impact wrench 1 000000

With 1/2" square drive, for driving the HUS-H and HR screw anchor in 8 14 mm sizes

With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, two S-NSD 1/2" 13, two S-NSD 1/2" 15

1/2" S-NSD socket wrench inserts with 1/2" square drive, for driving hex. head screwsOrdering designation Size AF (mm) Package contents Item no.

Set S-NSD medium duty HUS for HUS 8 and HUS 10 screw anchors 13, 15 4 408429

Set S-NSD light duty HUS for HUS 6 and HUS 8 screw anchors 4084303x S-NSD 1/2" 13, bit holder S-BH 28 1/2" 1/4", S-B-TX 30, S-B-TX 40

S-NSD 1/2"-13 S socket wrench insert for HUS 6 and HUS 8 screw anchors 13 1 408402

S-NSD 1/2"-13 L socket wrench insert for HUS 6 and HUS 8 screw anchors 13 1 408416

S-NSD 1/2"-15 S socket wrench insert for HUS 10 screw anchor 15 1 408403



S-NSD 1/2"-21 S socket wrench insert for HUS 14 screw anchor 21 1 408408

Further socket wrench inserts, adapters and extensions are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

1/2" square drive extension


S-NSD 30 deg universal adapter 1 386059

Mechanical anchors: frame anchors

HRD-UGT 8 frame anchor, galvanized 8 mm frame anchor with countersunk head screw, for use in all base materials

Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.

HRD-UGT 8x100/50 8 60 50 50 202343

HRD-UGT 8x120/70 8 60 70 50 202344

HRD-UGT 8x140/90 8 60 90 50 202345

HRD-UGT 8x60/10 8 60 10 50 202341

HRD-UGT 8x80/30 8 60 30 50 202342

HRD-UGT 10 frame anchor, galvanized 10 mm frame anchor with countersunk head screw, for use in all base materials


HRD-UGT 10x80/10 10 80 10 50 257272

HRD-UGT 10x100/10 10 80 30 50 257273

HRD-UGT 10x120/50 10 80 50 50 257272

HRD-UGT 10x140/70 10 80 70 50 257275

HRD-UGT 10x160/90 10 80 90 50 257283

HRD-UGT 10x180/110 10 80 110 50 257276

HRD-UGT 10X200/130 10 80 130 50 257284

HRD-URT 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel countersunk head screw, for use in all base materials


HRD-URT 10x80/10* 10 80 10 50 257289

HRD-URT 10x120/50 10 80 50 50 257290

HRD-UGS 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel hex head screw, for use in all base materials


HRD-UGS 10x80/10 10 80 10 50 257277

HRD-UGS 10x100/30 10 80 30 50 257278HRD-UGS 10x120/50 10 80 50 50 257279

HRD-UGS 10x140/70 10 80 70 50 257275

HRD-UGS 10x160/90 10 80 90 50 257286

HRD-UGS 10x180/110 10 80 110 50 257281



40/48

Hilti HSS

twist drills for

metal fabricators

Top gear throughout.


Flat out across the finishing line!

Hilti twist drills for metal keep you up

to maximum speed right to the end

of the very last lap. Every ones a

winner in this range of extremely

durable, fast-cutting HSS drill bits

and heat-resistant cobalt bits for the

hardest drilling jobs. Available indi-

vidually in all diameters or in practi-

cal sets for metal fabricators.

Try them now!


Hilti Corporation I 9494 Schaan I Liechtenstein I P +423-234 2111 I F +423-234 2965 I www.hilti.com


41/48

HRD-UGS 10 U frame anchor, galvanized 10 mm frame anchor with collar and hex. screw, for use in all base materials


HRD-UGS 10x80/10U 10 80 10 25 257282

HRD-UGS 10x100/30U 10 80 30 25 334936

HRD-UGS 10x120/50U 10 80 50 25 388134


HRD-URS 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel hex. screw, for use in all base materials


HRD-URS 10x80/10 10 80 10 50 257291

HRD-URS 10x100/30 10 80 30 50 257292

HRD-URS 10x120/50 10 80 50 50 257293


HRD-UGS 10 U frame anchor, A4 stainless steel 10 mm frame anchor with collar and stainless steel hex. screw, for use in all base materials


HRD-UGS 10x80/10U 10 80 10 25 337184

HRD-UGS 10x100/30U 10 80 30 25 305180

HRD-SGT 10 frame anchor, galvanized 10 mm frame anchor with countersunk head screw, for use in all solid base materials


HRD-SGT 10x60/10 10 80 10 50 331500

HRD-SGT 10x80/30 10 80 30 50 331501

HRD-SGT 10x100/50 10 80 50 50 331502

HRD-SGT 10x120/70 10 80 70 50 331503


HRD-SRT 10 frame anchor, A4 stainless steel 10 mm frame anchor with collar and stainless steel hex. screw, for use in all solid base materials


HRD-SRT 10X60/10 10 60 10 50 331513

HRD-SRT 10X100/50 10 60 50 50 331514

HRD-SRT 10X140/90 10 60 90 50 331515

HRD-SGS 10 frame anchor, galvanized 10 mm frame anchor with hex. screw, for use in all solid base materials


HRD-SGS 10x60/10 10 80 10 50 331506

HRD-SGS 10x80/30 10 80 30 50 331507

HRD-SGS 10x100/50 10 80 50 50 331508


HRD-SGS 10 U frame anchor, galvanized 10 mm frame anchor with collar and hex. screw, for use in all solid base materials


HRD-SGS 10x60/10U 10 80 10 50 332295

HRD-SGS 10x80/30U 10 80 30 50 334937

41



42/4842


HRD-SRS 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel hex. screw, for use in all solid base materials


HRD-SRS 10x60/10 10 80 10 50 331516

HRD-SRS 10x80/30 10 80 30 50 331517

HRD-SRS 10x100/50 10 80 50 50 331518


HRD-SRS 10 U frame anchor, A4 stainless steel 10 mm frame anchor with collar and stainless steel hex. screw, for use in all solid base materials


HRD-SRS 10x60/10U 10 80 10 25 305181

HRD-SRS 10x80/30U 10 80 30 25 305182

Chemical anchors

HIT-HY 150-MAX injectable mortar

Ordering designation Contents (ml) Package contents Item no.

Hilti HIT-HY 150 MAX/330/2 330 1 298119

For cracked and uncracked concrete

Hilti HIT-HY 150 MAX/500/2 500 1 298220

For cracked and uncracked concrete

HIT-HY 70 injectable mortar


Hilti HIT-HY 70/330/2 330 1 383677

For uncracked concrete, hollow or solid brick/block, cellular concrete, natural stone

Hilti HIT-HY 70/500/2 500 1 383681

For uncracked concrete, hollow or solid brick/block, cellular concrete, natural stone

HIT-HY MM PLUS injectable mortar


Hilti HIT-MM PLUS/330/1 330 1 408952

For light-duty fastenings in masonry and concrete

Hilti HIT-MM PLUS/500/1 500 1 408954

For light-duty fastenings in masonry and concrete

Dispensers


MD 2500 dispenser set 1 369220

With cleaning aids

ED 3500-A CAS cordless dispenser 1 260862With cleaning aids

Other cleaning aids and accessories are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

HIT-V anchor rods, galvanized With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete

Ordering designation Drill bit dia. (mm) Min. hole depth (mm) Fixture thickness (mm) Package contents Item no.

HIT-V M8x80 10 60 20 20 387054

HIT-V M8x110 10 80 50 20 387055

HIT-V M10x115 12 60 55 10 387146

HIT-V M10x130 12 90 23 10 387058

HIT-V M12x110 14 70 40 10 387060

HIT-V M12x120 14 70 50 10 387147

HIT-V M12x150 14 110 21 10 387061

HIT-V M16x150 18 80 70 5 387064

HIT-V M16x200 18 125 52 5 387065

HIT-V M16x300 18 80 220 5 387066

Anchor rods in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com


43/4843


HIT-V-R anchor rods, A4 stainless steel With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete

Ordering designation Drill bit dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.

HIT-V-R M8x80 10 60 20 20 387074

HIT-V-R M8x110 10 60 50 20 387075

HIT-V-R M10x115 12 60 55 10 387148

HIT-V-R M10x130 12 60 23 10 387078HIT-V-R M12x110 14 70 40 10 387080

HIT-V-R M12x120 14 70 50 10 387149

HIT-V-R M12x150 14 110 21 10 387081

HIT-V-R M16x150 18 80 70 5 387084

HIT-V-R M16x200 18 80 52 5 387085

HIT-V-R M16x300 18 80 220 5 387086


AM threaded rods, galvanized

Ordering designation Drill bit dia. (mm) Package contents Item no.

AM6X1000 8.8 8 20 407495AM8X1000 8.8 10 20 407496

AM10X1000 8.8 12 20 407497

AM12X1000 8.8 14 15 407498

AM16X1000 8.8 18 5 407499

Other steel grades and dimensions are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

HIS-N internally threaded sleeves, galvanized With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete

Ordering designation Drill bit dia. (mm) Hole depth (mm) Thread size Package contents Item no.

HIS-N M8x90 14 95 M8 10 258015

HIS-N M10x110 18 115 M10 10 258016

HIS-N M12x125 22 130 M12 5 258017

HIS-N M16x170 28 175 M16 5 258018

HIS-N M20x205 32 210 M20 5 258019


HIS-RN internally threaded sleeves, A4 stainless steel With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete

Ordering designation Drill bit dia. (mm) Hole depth (mm) Thread size Package contents Item no.

HIS-RN M8x90 14 95 M8 10 258024

HIS-RN M10x110 18 115 M10 10 258025

HIS-RN M12x125 22 130 M12 5 258026

HIS-RN M16x170 28 175 M16 5 258027HIS-RN M20x205 32 210 M20 5 258028

HIT-SC mesh sleeves for Hilti HIT-HY 70 and Hilti HIT MM For use in all building materials with cavities

Ordering designation Drill bit dia. (mm) Anchor rod dia. (mm) Sleeve length (mm) Package contents Item no.

HIT-SC 12x50 12 6 50 20 375979

HIT-SC 12x85 12 6 85 20 375980

HIT-SC 16x50 16 8 + 10 50 20 375981

HIT-SC 16x85 16 8 + 10 85 20 375982

HIT-SC 18x50 18 10 + 12 50 20 360485

HIT-SC 18x85 18 10 + 12 85 20 360486

HIT-SC 22x50 22 12 + 16 50 20 273662

HIT-SC 22x85 22 12 + 16 85 10 284511


44/4844


Fastening gratings

Direct fastening


DX 460 GR powder-actuated tool 1 304396

DX 76 PTR powder-actuated tool 1 384004

X-FCM-M grating fastening disc, duplex coated

Ordering designation Shank length (mm) Fixture thickness (mm) Package contents Item no.

X-FCM-M 25/30 23 25 30 100 378683

X-FCM-M 35/40 33 35 40 100 378684

X-FCM-M 45/50 43 45 50 100 378685

X-CR M8 threaded studsfor X-FCM grating discs, A4 stainless steel, thread length 15 mm, shank dia. 4 mm

Ordering designation Fixture thickness (mm) Thread length (mm) Package contents Item no.

X-CR M8-15-12 P8 9 - 13 15 100 372033

X-CR M8-15-12 FP10 9 - 13 15 100 372034

X-GR-RU fastener, duplex coated, A4 stainless steel nail

Ordering designation Grating height (mm) Package contents Item no.

X-GR-RU 25-30 CR20P8 25 30 100 384239

X-GR-RU 35-40 CR20P8 35 - 40 100 384240

X-MGR grating fastener, hot-dip galvanizedFor fastenings gratings by hand using the SF 144-A cordless screwdriver and S-B HEX6 bit

Ordering designation Grating height (mm) Tool size Package contents Item no.

X-MGR M60 grating fastener 25 40 HEX6 20 384233

Accessories


X-76-F-8-GR-PTR fastener guide for fastening gratings using the DX 76 PTR 1 388852

X-460-TGR fastener guide for fastening gratings using the DX 460 GR 1 386124

X-76-P-8-GR-PTR piston for fastening gratings using the DX 76 PTR 1 388853

X-460 PGR piston for fastening gratings using the DX 460 GR 1 305448

Spray SNDX 66 ml 1 308976

Goggles I-VO 805 PSclear

1 285780Other accessories and cleaning sets are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com

Cartridges for powder-actuated tools


Special cartridge 6.8/18 M red for the DX 76 PTR 100

Metal Fab Combi

Documents

Transcript of Metal Fab Combi