![Program funkcjonalno - użytkowy · źródło: dokumentacja techniczna Tabela 7. Mieszkanie służbowe Lp. Nr techn. nazwa wg DT pow.[m2] 52 M3 kuchnia 4,20 53 M2 przedpokój 6,10](https://static.fdocuments.pl/doc/165x107/5f1aacb4fbbeae67b3072cea/program-funkcjonalno-u-rdo-dokumentacja-techniczna-tabela-7-mieszkanie.jpg)
@ TECHN|CKT AZKUsrgruf USTAV STAVEBNI pnnHA, s.p.@ TECHN|CKT AZKUsrgruf USTAV STAVEBNI pnnHA, s.p....
1
@ TECHN|CKT AZKUsrgruf USTAV STAVEBNI pnnHA, s.p. Technical and Test Institute f or Construction Prague Akreditovand zkuSebni laboratof, Autorizovand osoba,Notifikovand osoba,Certifikadni orgdn, lnspekdni orgdn Accredited Test Laboratory, Authorised Body, Notified Body, Certification Body, Inspection Body Proseckd 811176a,190 00 Praha 9, CzechRepublic EC CERTIFICATE OF FACTORY PRODUCTION CONTROL No. 1020-CP D-03 0047 682 fn compliance with Council Directive 89/106/EEC of 21 December 1988 on the approximationof laws, regulations and administrative provisions of the Member States relating to construction products (the ConstructionProducts Directive or CPD), as later amended, it has been stated that the construction product: Chimneys - Clay/Geramic Flue Liners Circular profile - Range of nominal diameters 100-250 mm tyq: Al N1 (G), Dl Pl (O) A 3 N l W A 3 ; D4PlWA3 placedon the marketby EN 1457-1 EN 1457-2 MPRrs*;;!! P-D Refractories CZ, a. s. Velke Opatovice 679 63 Velk6 Opatovice, ld: 16343409, CZ and produced in the factory P-D Refractories CZ, a. s., Divize 01 Star6Samotka is submitted by the manufacturer to the initialtype{esting of the product,a factory production controland to the further testing of samplestaken at the factory in accordance with a prescribed test plan and that the notified body No. 1O2O - Technical and Test Institute for ConstruciionPrague has performed the initial inspection of the factory and of the factory production control and performs the continuous surveillance, assessment and approval of the factoryproduction control. This certificateattests that all provisionsconcerningthe attestationof factory productioncontrol described in Annex 7A of the standard(s) EN 1457-1i2012, EN 1457-2i2012 were applied. This certificate was first issued on 2012-12-27 and remainsvalid as long as the conditions laid down in the harmonised technical specification in reference or the manufacturing conditions in the factory or the FPC itselfare not modified significantly. Pfzei, 2012-12-27 Ing. Alexander Trinner Deputymanager of the NotifiedBody 1020 ffi
Transcript of @ TECHN|CKT AZKUsrgruf USTAV STAVEBNI pnnHA, s.p.@ TECHN|CKT AZKUsrgruf USTAV STAVEBNI pnnHA, s.p....
@ TECHN|CKT AZKUsrgruf USTAV STAVEBNI pnnHA, s.p.T e c h n i c a l a n d T e s t I n s t i t u t e f o r C o n s t r u c t i o n P r a g u eAkreditovand zkuSebni laboratof, Autorizovand osoba, Noti f ikovand osoba, Cert i f ikadni orgdn, lnspekdni orgdnAcc red i t ed Tes t Labo ra to ry , Au tho r i sed Body , No t i f i ed Body , Ce r t i f i ca t i on Body , I nspec t i on BodyProseckd 811176a,190 00 Praha 9, Czech Republic
EC CERTIFICATEOF FACTORY PRODUCTION CONTROL
No. 1 020-CP D-03 0047 682fn compliance with Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws,regulations and administrative provisions of the Member States relating to construction products(the Construction Products Directive or CPD), as later amended, it has been stated that the constructionproduct:
Chimneys - Clay/Geramic Flue LinersCircular profile - Range of nominal diameters 100-250 mm
tyq:Al N1 (G), Dl Pl (O)A 3 N l W A 3 ; D 4 P l W A 3
placed on the market by
EN 1457-1EN 1457-2
MPRrs*;;!!P-D Refractories CZ, a. s. Velke Opatovice
679 63 Velk6 Opatovice, ld: 16343409, CZ
and produced in the factory
P-D Refractories CZ, a. s., Divize 01 Star6 Samotkais submitted by the manufacturer to the initial type{esting of the product, a factory productioncontrol and to the further testing of samples taken at the factory in accordance with a prescribedtest plan and that the notified body No.
1O2O - Technical and Test Institute for Construciion Praguehas performed the initial inspection of the factory and of the factory production control andperforms the continuous surveillance, assessment and approval of the factory production control.This certificate attests that all provisions concerning the attestation of factory production controldescribed in Annex 7A of the standard(s)
EN 1457-1i2012, EN 1457-2i2012were applied.
This certificate was first issued on 2012-12-27 and remains valid as long as the conditions laiddown in the harmonised technical specification in reference or the manufacturing conditions in thefactory or the FPC itself are not modified significantly.
Pfzei, 2012-12-27
I n g . A l e x a n d e r T r i n n e rDeputy manager of the Notified Body 1020
ffi
